video flashing benq with iprep101 voo6
Benq Firmware Flashing Video Tutorial with IPREP 101 v005
A cofree and crypie production
This video will show you step by step how to flash a Benq Drives Firmware using Iprep 101. v005
You can download it here.

If you are using the 360 to power the dvd drive it will take longer for the D1 to show up.The 360 must power up.
We left out
that you should reboot the computer after the dump.Then make a backup of you orig firmware.
and that you need to put a check in the "patch MTK flash" box before you prepare destination
Another thing is what Sadalius posted.I put a copy in this post to make sure you will see it.
This was posted by Sadalius and he is right on.
Although this works pretty good, the need to verify that it wasn't a bad dumpt is still there. This is one thing that you'll hear me say alot. Check that dump for a proper key before flashing it...... After all, if you get a bad dump, that means your original is bad, your hacked is bad, and if you flash it, your drive is bad as well.
You check your firmware with "firmware toolbox v4.5 you can find it here
http://www.robinhoodsplayground.com/for ... &t=48#p101