LiteOn drive flashing?
-
KornFreak4500
- Bandit
- Posts: 58
- Joined: Tue Mar 11, 2008 7:42 pm
- Location: Pennsylvania
- Contact:
LiteOn drive flashing?
I know how to flash the Benq drives, but now im stuck on the new liteon drives. is there any way to flash them without installing some type of hardware?
GEARS OF WAR 2! you couldn't say it any better.
-
commando_lee
- Ally of Robinhood
- Posts: 1821
- Joined: Sun Apr 26, 2009 12:50 pm
- Location: Up high in the tree looking out for the Sheriff of Nottingham
Re: LiteOn drive flashing?
viewtopic.php?f=195&t=5130" onclick="window.open(this.href);return false;KornFreak4500 wrote:I know how to flash the Benq drives, but now im stuck on the new liteon drives. is there any way to flash them without installing some type of hardware?
all you will need is a sata card with VIA6421 chipset on it they are 100% compatable also an rs232 cable
................................................................RobinHoods Very Own
.......................................
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
.......................................
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
-
KornFreak4500
- Bandit
- Posts: 58
- Joined: Tue Mar 11, 2008 7:42 pm
- Location: Pennsylvania
- Contact:
-
KornFreak4500
- Bandit
- Posts: 58
- Joined: Tue Mar 11, 2008 7:42 pm
- Location: Pennsylvania
- Contact:
Re: LiteOn drive flashing?
every time i run i Iprep or PortIO32 i get a message that says "IPrep has encountered a problem and needs to close. We are sorry for the inconvenience" . How can i fix this?
GEARS OF WAR 2! you couldn't say it any better.
-
commando_lee
- Ally of Robinhood
- Posts: 1821
- Joined: Sun Apr 26, 2009 12:50 pm
- Location: Up high in the tree looking out for the Sheriff of Nottingham
Re: LiteOn drive flashing?
run iprep as administrator
in start menu right click iprep as select run as then use the administrator
RS232 cable is a 9pin serial com cable. you will ned a 9pin male - female if your going to use iprep
in start menu right click iprep as select run as then use the administrator
RS232 cable is a 9pin serial com cable. you will ned a 9pin male - female if your going to use iprep
................................................................RobinHoods Very Own
.......................................
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
.......................................
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.