I am trying to flash my BenQ drive with Jungleflasher v0.1.62 Beta. I have flashed other drives and never run into this problem before. I opened Jungleflasher and was able to read the original firmware and save it. I have the DVD key and everything. It wrote all 4 banks with the iXtreme firmware and when it was verifying the firmware it said something like "verification failed".
After that I tried to get it to write the firmware again and the same thing happened. Not knowing what to do, I put the drive back into the 360 and it get stuck during the post. It never launches the dashboard, but it will get to the large "X" with XBOX 360 below it.
I have tried to have Jungleflasher attempt to flash the original firmware back onto the drive, but now it will not unlock the drive. I can have the tray open half way and it still won't unlock the drive. I read the tutorial on a bad flash recovery, but I have been unable to get my computer to boot with a USB drive. Is the only way to fix the drive with iPrep and copy all of the files onto a CD? Or can I repair it with Jungleflahser? Or.....is my drive dead?
Any help is greatly appreciated as I just got this console back from M$. Thanks in advance.
Help with Benq flash with Jungleflasher....
-
emcryption
- Peasant
- Posts: 10
- Joined: Mon Jul 06, 2009 8:02 pm
-
emcryption
- Peasant
- Posts: 10
- Joined: Mon Jul 06, 2009 8:02 pm
Re: Help with Benq flash with Jungleflasher....
Okay. I figured out how to fix the problem. I used Jungleflasher and instead of unlocking the drive with the BenQ Unlock, I had the drive powered with the ck3 and I had the tray half open. I clicked the intro button and it gave me the message to click yes and power the drive off and on within one second. I did this and I was able to flash the drive like normal with JF.