Help with liteon drive!!!!!

[jarrod357]

I got the connectivity kit. I extracted the key and what not with jungleflasher 0.1.65 and spoofed my firmware. then I did liteon erase. I gave me all the info I needed but when I tried to write it said drive in vendor mode and wouldn't do it. Now my drive can't be detected in dosflash or jungleflasher. the drive doesn't eject. I get an error message like

Drive returned Status 0x7F.
Vendor: No drive detected!

it has come back 0x80 and ffff

I keep erasing and power cycling but I get the same thing. one time I got 0x80. I thought that would write but it said drive returned invalid status.

I don't know what to do. I have flashed 2 benqs with no problem this is just a major pain.

I have a via chipset. I tried it with the drivers uninstalled and installed. I have porti/o installed. I tried l-o-eras in dos and that doesn't work either.

I also tried a manual write in dosflash using
dosflash w e000 1 a0 2 0 4 c:\lite_cfw.bin 0
no luck


JungleFlasher 0.1.65 Beta
Session Started Tue Aug 25 23:11:20 2009

This is a 32 bit process running on a 32 bit CPU
PortIO is installed and running.
Found 4 I/O Ports.
Found 2 Com Ports.
Found 4 windows drives A: C: D: E:
Found 1 CD/DVD drives E:

Loading target file C:\Users\rich b\Desktop\mediastuff\Lite_CFW.bin
Target File MD5 hash is: 313cadccdadb0b7e9a8c6d9a8a65f317
Inquiry area found
Current DVD key is
Firmware is a Lite-On encrypted iXtreme OSIG: PLDS DG-16D2S 7485
Firmware type is: iXtreme v1.60-12X-FINAL-DG-16D2S

Sending Lite-On-Erase request to port 0xE000
..............
Drive returned Status 0x7F
....................
Device Intro failed!



Any help you can give me I would really apreciate. I tried to give as much info as possible and I tried searching for 2 days around the net. I tried robinhoodsplayground fix for frozen liteon but it won't work because the drive isn't detected.

[commando_lee]

viewtopic.php?f=197&t=7041" onclick="window.open(this.href);return false;

[djshauny1]

This happend to me the other day. All i did was power down the drive and pc. Do a restart. Open up JF. Turn drive back on. Load up the CFW which u created as TARGET firmware. Go to the dvd32 tab. Select the port u was using which was picking up the drive before. Go to mtk flash 32 tab. click lite on erase. After u get the second warning, click ok and power cycle the drive. Hopefully your drive will go into vendor mode and details will appear in jf on the right. If it does that just click write and it will write the banks. Click outro reset. power drive off. The turn back on. If it ejects turn back off the drive hook it up into your 360 and test.

Note. I closed the drive when i restarted windows before i did the recovery, dont no if thats needed but it worked for me.

Ive given up with JF at the min and im getting to grips with iprep. Had to many probs with jf . Anyways give what i said a try and post back your results.

Hope u get everything working again