E66 Samsung

[BlackDahlia]

I tried to flash a 360 with iXtreme 1.6 on a Samsung. Everything was successful, but when I hook the 360 up I get an E66 error with a red light flashing on the lower right. I have the backup folder from iPrep 10.7 with two files in it. "SAMOFW.bin" and "SAMCFW.bin"

Anything I can do?

EDIT: I should note that I didn't spoof the drive when it asked me to. Maybe I should have? I checked the key in FWtools and JF and they are the same and look good. In JF my original firmware shows as stock ms25. But the hacked firmware shows as iXtreme ms28. Shouldn't the hacked firmware be ms25 also?

Basically I just want to know how to restore the Samsung with the OFW using iPrep 10.7. And then maybe try to re-flash later.

[Shootsteel]

if your trying to say that you have a ms 25 and were asked if you wanted to spoof....then thats your problem right there do it again and say yes to spoof to ms28 as this is the only FW recognized by your console.

[BlackDahlia]

I tried it again. But this time it didn't ask me if I wanted to spoof it. Anyway I can still spoof it?

EDIT: Just an update. I got it to work. I had to restore the Samsung's OFW with Jungle Flasher. It wouldn't let me restore it in iPrep. It would automatically spoof the OFW to ms28. I then flashed it with iXtreme 1.6 using iPrep. This time I said yes when it wanted me to spoof the firmware to ms25. All works well now.

To all ms25 users: make sure you say yes when it wants to spoof the iXtreme to ms25. lol.