Cant dump this Hit 79FK using jungle 1.66(VIA drivers installed,portIO installed and running)I flashed a benq this morning
(without VIA drivers,had to reinstall drivers for the Hit 79FK) One last thing i dont have the green wire from the CK3 pro iam using the blue one with the ck3 probe instead,to power the drive. Does that make a difference?(my green wire ripped)
This is my log info
Mode-B Done!
Scanning for hardware changes
Found drive C: - Hard Drive.
Found drive D: - CD/DVD. <--- Hitachi found
Playing 79Unlock Audio CD
Pausing 79Unlock Audio CD, after 500mS
Ejecting 79Unlock Audio CD
Setting bit 3 @ 0x5BD
Executing code in Ram
Done!
Dumping f/w of Hitachi 0078/0079 by Ram Upload Method via WIN32 API
..Ram Upload Dump Failed
Hit 79FK not dumping!!!!!
-
calishooter
- Squire
- Posts: 35
- Joined: Wed Jun 10, 2009 1:22 am
- Location: From da WEST
Hit 79FK not dumping!!!!!
meX
BOX
BOX
-
docwarbucks
- Trusted Member
- Posts: 164
- Joined: Wed Apr 08, 2009 5:52 am
- Location: Florida
- Contact:
Re: Hit 79FK not dumping!!!!!
that could be the problem try to repair your green wire. i have heard of people frying a hitachi with the blue ck3 probe connector.
-
calishooter
- Squire
- Posts: 35
- Joined: Wed Jun 10, 2009 1:22 am
- Location: From da WEST
-
intheshade
- Squire
- Posts: 49
- Joined: Fri Oct 02, 2009 4:53 am
Re: Hit 79FK not dumping!!!!!
I have done hitachi's with an onboard sata and with the 6421 drivers renamed.
With the 6421 drivers renamed I had to use select port io. I could not see the drive in jungle flasher but was able to flash it.
With the onboard sata, after I sent it to mode b. I would have to find it in my device manager and scan for hardware changes.
But with both computers, one thing remained a constant. The dvd needed to be fully ejected when I dumped the firmware, if not it would fail everytime. But I dont have a ck3, I use an xbox as a power source.
With the 6421 drivers renamed I had to use select port io. I could not see the drive in jungle flasher but was able to flash it.
With the onboard sata, after I sent it to mode b. I would have to find it in my device manager and scan for hardware changes.
But with both computers, one thing remained a constant. The dvd needed to be fully ejected when I dumped the firmware, if not it would fail everytime. But I dont have a ck3, I use an xbox as a power source.
-
calishooter
- Squire
- Posts: 35
- Joined: Wed Jun 10, 2009 1:22 am
- Location: From da WEST
Re: Hit 79FK not dumping!!!!!
I fixed da green wire and tried it again and da same error. Will try to rename and make sure da tray is fully ejected and report back. THANX
meX
BOX
BOX
-
calishooter
- Squire
- Posts: 35
- Joined: Wed Jun 10, 2009 1:22 am
- Location: From da WEST
Re: Hit 79FK not dumping!!!!!
No that didnt work. I got a different log when i renamed da driver ( i renamed it to viamraid.bak)
Mode-B Done!
Playing 79Unlock Audio CD
Pausing 79Unlock Audio CD, after 500mS
Ejecting 79Unlock Audio CD
Done!
Dumping f/w of Hitachi 0078/0079 by Ram Upload Method over Port IO
.Ram Upload - Upload Failed
Mode-B Done!
Playing 79Unlock Audio CD
Pausing 79Unlock Audio CD, after 500mS
Ejecting 79Unlock Audio CD
Done!
Dumping f/w of Hitachi 0078/0079 by Ram Upload Method over Port IO
.Ram Upload - Upload Failed
meX
BOX
BOX
-
intheshade
- Squire
- Posts: 49
- Joined: Fri Oct 02, 2009 4:53 am
Re: Hit 79FK not dumping!!!!!
Ok you may need to stop while you are ahead.... I wish I knew the answer to your problem. The people who run this site know all kinds, wait for them to drop by.
-
calishooter
- Squire
- Posts: 35
- Joined: Wed Jun 10, 2009 1:22 am
- Location: From da WEST
-
intheshade
- Squire
- Posts: 49
- Joined: Fri Oct 02, 2009 4:53 am
Re: Hit 79FK not dumping!!!!!
I guess nobody knows the answer to your question.