Need help with LITEON DRIVE

[peacock]

hi - I need your help...my liteon drive is MODEL NO: DG-16D2S-09C...manufactre date on drive is JULY 2009....can this be flashed or not ?

if so, i cant get the basic info of the drive to show up in JF 1.66b...im using my INTEL ONBOARD SATA cos it works fine with my previous liteon drive...when i click on the DVD KEY 32 tab...my dirve properties are not shown in the drive properties info box, everything is blank...what am i doing wrong?...do i need my ck3 usb connected or not ?...any ideas please...im trying to follow the video tut thats been posted by shoesteel....cheers

[commando_lee]

Firstly check what HW rev and FW rev it is, these can be found on the big sticker on the drive near the botton

[peacock]

Firstly check what HW rev and FW rev it is, these can be found on the big sticker on the drive near the botton

hi - HW is A0A2
FW is 83850C

[commando_lee]

Ok this is the video tut for iprep viewtopic.php?f=195&t=7670" onclick="window.open(this.href);return false;
jungle flasher viewtopic.php?f=195&t=7724" onclick="window.open(this.href);return false;

Some drives will flash and some wont, just try a few times. But no not use a probe

[peacock]

Ok this is the video tut for iprep viewtopic.php?f=195&t=7670" onclick="window.open(this.href);return false;
jungle flasher viewtopic.php?f=195&t=7724" onclick="window.open(this.href);return false;

Some drives will flash and some wont, just try a few times. But no not use a probe

ok i will try that....the good new is that i also have VIA SATA CARD on my pc....i have just followed the video tut for JF...i managed to dump the key 3 times and it matches each time, i also loaded the firmware...i dint carry on with the erase part because of the infamous via card freeze.....see my log below....
are these drives recoverable should i accidently brick it if i have the necessary files saved ?
I will also try the iprep method..as well
Why wasnt the drive properties shown when i used my intel onboard sata ?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.66 Beta

Session Started Sat Oct 24 16:51:57 2009



This is a 32 bit process running on 2 x 32 bit CPUs

PortIO is installed and running.

Found 4 I/O Ports.

Found 0 Com Ports.

Found 8 windows drives C: D: E: F: G: H: I: J:

Found 2 CD/DVD drives E: F:



Sending LO83info request to I/O port 0xD000



............

.

0000: 49 6E 20 44 65 64 69 63 - 61 74 69 6F 6E 20 54 6F In Dedication To

0010: 20 54 68 65 20 42 69 72 - 74 68 20 4F 66 20 4D 61 The Birth Of Ma

0020: 63 6B 61 79 20 4F 6E 20 - 46 65 62 72 75 61 72 79 ckay On February

0030: 20 54 77 65 6C 76 65 20 - 32 30 30 37 20 FF FF FF Twelve 2007 ...

0040: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................

0050: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................

0060: FB 62 8A C9 04 74 52 D9 - B4 CB FF 64 D7 AA 8F BB .b...tR....d....



............. Extract no.2 matches



0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS

0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S

0020: 38 33 38 35 30 43 41 30 - 41 32 44 36 30 39 43 47 83850CA0A2D609CG

0030: 39 33 30 38 31 32 30 30 - 34 57 41 20 20 20 00 00 930812004WA ..

0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................



Inquiry String saved to C:\Documents and Settings\HP_Owner\Desktop\my liteon drive info dump 2\Inquiry.bin



0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0010: 00 00 00 00 44 36 30 39 - 43 47 39 33 30 38 31 32 ....D609CG930812

0020: 30 30 34 57 41 20 20 20 - 00 00 00 00 00 00 33 38 004WA ......38

0030: 35 38 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 58C0 LPSD GD

0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2

0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00 ..

0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................

0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 00 00 00 00 ..x.x...x.......

0090: 00 00 00 00 00 00 00 00 - 02 02 00 00 68 00 00 00 ............h...

00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

00B0: 20 20 00 00 ..



Identify String saved to C:\Documents and Settings\HP_Owner\Desktop\my liteon drive info dump 2\Identify.bin



0000: 44 36 30 39 43 47 39 33 - 30 38 31 32 30 30 34 57 D609CG930812004W

0010: 41 20 20 20 FF FF FF FF - 39 47 31 35 30 38 35 31 A ....9G150851

0020: 31 36 44 32 31 34 58 58 - 41 30 FF FF 53 34 50 39 16D214XXA0..S4P9

0030: 37 31 30 30 30 30 30 30 - 32 35 34 38 39 34 00 00 71000000254894..

0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 32 FF FF ............A2..





Extracted drive key DF18D9631B618AA5ACE959FAEC04CDA9





Dummy.bin file saved to C:\Documents and Settings\HP_Owner\Desktop\my liteon drive info dump 2\Dummy.bin



Loading DVDkey source file

Inquiry string found

Identify string found

DVD key found @ 0xA030 key is DF18D9631B618AA5ACE959FAEC05DEB0

Firmware is a Lite-On Dummy OSIG:

Firmware type is: LO83info Extract



Auto-Loading target file C:\Documents and Settings\HP_Owner\Desktop\JungleFlasher.0.1.66.Beta\JungleFlasher v0.1.66 Beta (49)\firmware\ix16-liteon838.bin

Target File MD5 hash is: bc61fac4efd37b69f88dfabe6e104117

Genuine Lite-On 83850c iXtreme 1.6

Inquiry area found

Current DVD key is 55AA55AA55AA55AA55AA55AA55AA55AA

Firmware is a Lite-On encrypted iXtreme OSIG: PLDS DG-16D2S 8385

Firmware type is: iXtreme v1.60-12X-FINAL-DG-16D2S

DVD Key copied to target

Inquiry string copied from Source to Target

Identify string copied from Source to Target

Serial strings copied from Source to Target

Key database updated



Target f/w saved as: C:\Documents and Settings\HP_Owner\Desktop\my liteon drive info dump 2\Lite_CFW.bin

[commando_lee]

right so you have been able to get the good key and the dummy.bin you just need to disable the via drivers, that will stop jf from looking up

[peacock]

right so you have been able to get the good key and the dummy.bin you just need to disable the via drivers, that will stop jf from looking up

errrr slight problem, i managed to get my onboard sata working and it detected the drive info in JF, i thought great...erased and got the freeze as well...see log below..can i use iprep to recover ? i have edited the dvd key for obvious reasons, but key is the same..lol

JungleFlasher 0.1.66 Beta

Session Started Sat Oct 24 17:31:21 2009



This is a 32 bit process running on 2 x 32 bit CPUs

PortIO is installed and running.

Found 10 I/O Ports.

Found 0 Com Ports.

Found 8 windows drives C: D: E: F: G: H: I: J:

Found 2 CD/DVD drives E: F:



Sending LO83info request to I/O port 0x7400



............

.

0000: 49 6E 20 44 65 64 69 63 - 61 74 69 6F 6E 20 54 6F In Dedication To

0010: 20 54 68 65 20 42 69 72 - 74 68 20 4F 66 20 4D 61 The Birth Of Ma

0020: 63 6B 61 79 20 4F 6E 20 - 46 65 62 72 75 61 72 79 ckay On February

0030: 20 54 77 65 6C 76 65 20 - 32 30 30 37 20 FF FF FF Twelve 2007 ...

0040: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................

0050: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................

0060: FB 62 8A C9 04 74 52 D9 - B4 CB FF 64 D7 AA 8F BB .b...tR....d....



............. Extract no.2 matches



0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS

0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S

0020: 38 33 38 35 30 43 41 30 - 41 32 44 36 30 39 43 47 83850CA0A2D609CG

0030: 39 33 30 38 31 32 30 30 - 34 57 41 20 20 20 00 00 930812004WA ..

0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................



Inquiry String saved to C:\Documents and Settings\HP_Owner\Desktop\onboard here dump 2\Inquiry.bin



0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0010: 00 00 00 00 44 36 30 39 - 43 47 39 33 30 38 31 32 ....D609CG930812

0020: 30 30 34 57 41 20 20 20 - 00 00 00 00 00 00 33 38 004WA ......38

0030: 35 38 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 58C0 LPSD GD

0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2

0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00 ..

0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................

0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 00 00 00 00 ..x.x...x.......

0090: 00 00 00 00 00 00 00 00 - 02 02 00 00 68 00 00 00 ............h...

00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

00B0: 20 20 00 00 ..



Identify String saved to C:\Documents and Settings\HP_Owner\Desktop\onboard here dump 2\Identify.bin



0000: 44 36 30 39 43 47 39 33 - 30 38 31 32 30 30 34 57 D609CG930812004W

0010: 41 20 20 20 FF FF FF FF - 39 47 31 35 30 38 35 31 A ....9G150851

0020: 31 36 44 32 31 34 58 58 - 41 30 FF FF 53 34 50 39 16D214XXA0..S4P9

0030: 37 31 30 30 30 30 30 30 - 32 35 34 38 39 34 00 00 71000000254894..

0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 32 FF FF ............A2..





Extracted drive key DF18D9631B618AA5ACE959FAEC04CDA9





Dummy.bin file saved to C:\Documents and Settings\HP_Owner\Desktop\onboard here dump 2\Dummy.bin



Loading DVDkey source file

Inquiry string found

Identify string found

DVD key found @ 0xA030 key is DF18D9631B618AA5ACE959FAEC05DEB0

Firmware is a Lite-On Dummy OSIG:

Firmware type is: LO83info Extract



Auto-Loading target file C:\Documents and Settings\HP_Owner\Desktop\JungleFlasher.0.1.66.Beta\JungleFlasher v0.1.66 Beta (49)\firmware\ix16-liteon838.bin

Target File MD5 hash is: bc61fac4efd37b69f88dfabe6e104117

Genuine Lite-On 83850c iXtreme 1.6

Inquiry area found

Current DVD key is 55AA55AA55AA55AA55AA55AA55AA55AA

Firmware is a Lite-On encrypted iXtreme OSIG: PLDS DG-16D2S 8385

Firmware type is: iXtreme v1.60-12X-FINAL-DG-16D2S

DVD Key copied to target

Inquiry string copied from Source to Target

Identify string copied from Source to Target

Serial strings copied from Source to Target

Key database updated

Key data saved to C:\Documents and Settings\HP_Owner\Desktop\onboard here dump 2\Key.bin





Target f/w saved as: C:\Documents and Settings\HP_Owner\Desktop\onboard here dump 2\Lite_CFW.bin



Sending Lite-On-Erase request to port 0x7400

..............

Drive returned Status 0x50

....................

Device Intro failed!



Getting Status from port 0x7400

Invalid Status 0x80

[commando_lee]

viewtopic.php?f=197&t=7041" onclick="window.open(this.href);return false;

use that but obviously use the correct fw for the 83850 drive the iprep commands are the same

[peacock]

viewtopic.php?f=197&t=7041

use that but obviously use the correct fw for the 83850 drive the iprep commands are the same

hi - but this i for LITE-ON 162DS 74850C DRIVE ?....but i have the 83850c drive..? will it work on mine

[commando_lee]

Yes like i said in the other post the commands are the same. Just the correct fw for your drive

[peacock]

Yes like i said in the other post the commands are the same. Just the correct fw for your drive

so which sata shall i use the via sata or my intel onboard sata ?....do i need to erase the portIO for my via card and install the normal drivers or shall i leave it as it is ? what version of JF ?

[commando_lee]

Yes like i said in the other post the commands are the same. Just the correct fw for your drive

so which sata shall i use the via sata or my intel onboard sata ?....do i need to erase the portIO for my via card and install the normal drivers or shall i leave it as it is ? what version of JF ?

use wat ever version of jf u want to make the custom fw, use the via card. dont del anythin

[peacock]

Yes like i said in the other post the commands are the same. Just the correct fw for your drive

so which sata shall i use the via sata or my intel onboard sata ?....do i need to erase the portIO for my via card and install the normal drivers or shall i leave it as it is ? what version of JF ?

use wat ever version of jf u want to make the custom fw, use the via card. dont del anythin

ok will report back...

[peacock]

Yes like i said in the other post the commands are the same. Just the correct fw for your drive

so which sata shall i use the via sata or my intel onboard sata ?....do i need to erase the portIO for my via card and install the normal drivers or shall i leave it as it is ? what version of JF ?

use wat ever version of jf u want to make the custom fw, use the via card. dont del anythin

thanks mate...worked a treat....i didnt use the VIA SATA CARD....for some reason it would work, but when i switched to theINTEL ON BOARD SATA....it worked ....once again i appreciate the help and advice give by you...

[commando_lee]

Good work glad you got it sorted.