Write Error: Unknown flash type

[BartV]

I get this when I try to write the firmware:

Getting Status from port 0xDF00
Invalid Status 0xD0

Sending Lite-On-Erase request to port 0xDF00
..............
Drive returned Status 0xD0
....
Serial flash found with Status 0x72
Sending Vendor Outro to port 0xDF00
Manufacturer ID: 0x90
Device ID: 0x90
Flash Name: Unknown type
Flash Size: n/a
Unknown flash type Write aborted !




I repaired the key using the "serial" or something like that:

Loading DVDkey source file
Inquiry string found
Identify string found
DVD key found @ 0xA030 key is 93E6EBC20E31C971F104CB78C55D1B66
Firmware is a Lite-On Dummy OSIG: PLDS DG-16D2S 7485

Loading DVDkey source file
Inquiry string found
Identify string found
DVD key found @ 0xA030 key is 93E6EBC20E31C971F104CB78C55D1B66
Firmware is a Lite-On Dummy OSIG: PLDS DG-16D2S 7485
Loading target file C:\Users\Bart\Desktop\USB Stick backup\Rommel\JungleFlasher v0.1.62 inc FW Pack\firmware\ix16-liteon-repack.bin
Target File MD5 hash is: c3a17c9726f4be3cc3e597797caba7f9
Genuine Lite-On iXtreme 1.6
Inquiry area found
Current DVD key is 55AA55AA55AA55AA55AA55AA55AA55AA
Firmware is a Lite-On encrypted iXtreme OSIG: PLDS DG-16D2S 7485
Firmware type is: iXtreme v1.60-12X-FINAL-DG-16D2S
DVD Key copied to target
Inquiry string copied from Source to Target
Identify string copied from Source to Target
Serial strings copied from Source to Target
Source Serial 1 is blank, target not changed !
Source Serial 2 is blank, target not changed !

Target f/w saved as: C:\Users\Bart\Desktop\Lite_CFW.bin
Key data saved to C:\Users\Bart\Desktop\Key.bin



This is showing my configuration in the Device Manager:

[stutterman]

hi mate you need to uninstall the via drivers and install portio32
go to the jf web site and download the pdf jf text guide (on how to do this )
hope this helps

[djshauny1]

Ok
Looks like u are running PortIO so no need to do that
Try sending Intro/device id until u get the good flash chip properties come up in that box on the right
If not try the lite on erase button again.
It will eventually work And you will get the correct flash chip properties

Id also suggest trying iprep
Its much better in my opinion

DJ

[BartV]

Hi guys,

thank you for your previous advice as now I can erase and write succesfully however there is a problem with the files that I'm loading to get the key. I think I have the the right files loaded from the right directory (the first time I dumped the keys)

When I repaired the serial jungleflasher doesn't show if the key is good or not. You'll see it in a few screenshots down here,

- http://img526.imageshack.us/i/capturerl.png/" onclick="window.open(this.href);return false;

- http://img526.imageshack.us/i/capture1t.png/" onclick="window.open(this.href);return false;