Hi I followed shootsteels tutorial and during the flash of my lite-on drive Jungle Flasher froze and I had to force close it. From what I have read you can flash the original firmware back onto the drive but I can't figure out were JF saved the original firmware files. So if I could get some help it would be greatly appreciated.
Tutorial I used = http://www.robinhoodsplayground.com/for ... 195&t=7783" onclick="window.open(this.href);return false;
Jungle Flasher froze during flash (Lite-on)
-
dustman1995
- Bandit
- Posts: 166
- Joined: Sat Mar 07, 2009 11:16 am
- Location: Youngstown, OH. Home of Kelly Pavlik
Re: Jungle Flasher froze during flash (Lite-on)
Look in Documents. Then after you find it, go here viewtopic.php?f=63&t=4351" onclick="window.open(this.href);return false; and do all those steps first. After that you should be able to erase and write your liteon with no problem. Just remember where you put those files and don't be in such a hurry to click through. Good luck 
Life is full of influences, It's your application that sets you apart.
-
HaGGardSmurf
- Ally of Robinhood
- Posts: 4088
- Joined: Tue Feb 03, 2009 9:46 am
- Location: Alberta, Canada
Re: Jungle Flasher froze during flash (Lite-on)
Well the thing is, there is no original FW for the lite-on once you have erased the drive, there is no way to return it to stock. Currently you will need to do the work around, then try to resurrect the drive in jungle flasher, or use cofree's method with dos flash. Either way you will need to flash ixtreme.
