im so stuck right now. please help

[jkid506]

alright im using iprep 10.7 on a vista 32 bit, im using an onboard sata flashing a liteOn 74. im using COM 3 thats what port i put. i also have portIO installed. at the part where have to put 1234567 12345. its not reading the command. any suggestions. maybe i dont have the drive in the half open thing right? its steadily blinking. my god i need help lol. thanks

[darktron]

mm have you try using JungleFlasher that what i use to flash my lite-on 74 and you need a ck3 pro kit and probe to get the dvd key off the drive

here one video for the JF flash-on 74
http://www.robinhoodsplayground.com/for ... 195&t=7783" onclick="window.open(this.href);return false;

here one for iprep 10.7 flash lite-on 74
http://www.robinhoodsplayground.com/for ... 195&t=7669" onclick="window.open(this.href);return false;

[jkid506]

jungle flasher keeps freezing. everytime i start it up it gives me an error

[darktron]

if your lite-on drive is lock up this well help you fix it

here a video to fix lock up lite-on drive
http://www.robinhoodsplayground.com/for ... 195&t=3226" onclick="window.open(this.href);return false;

[jkid506]

its not locked up. i havent even extracted the key yet. i dont know whats going on.

its says Microsoft .Net framework
Unhandled exception has occurred in your application. If you click continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.

DragDrop registration did not suceed.

Thats what happens when i open JF. i click Continue about five times and then JF loads up but it freezes on any button i touch.

[convict0]

did u download and installed Microsoft .Net framework

[jkid506]

did u download and installed Microsoft .Net framework

um good question lol. no i didnt lol. time to google

[jkid506]

yep i had it on there

[jkid506]

i got jungle flasher to work properly. but it wont bring up my drive. its bring up the wrong COM port. i put it in port 3 and it brings up 4

[darktron]

you have to find your drive in one of your port and yes you have to use the probe to get the dvd key and yes you have to set it to COM3

[jkid506]

but im using the 360 to power the drive

[jkid506]

im back for more help

[iamwatt]

but im using the 360 to power the drive

you'd make your life a whole lot easier if you got a connectivity kit and a via card. . . and if you use iPrep you have to use com port one.

have you taken a look at this? lite-on 74 tutorial