dump drive - ram upload execute failed

[funkysy]

i been tryin flash hitachi 79fl with J/F1.66b

now i can send it into mode b and then 79 lock fine but when i try to dump drive in portIO it keeps say ram upload execute failed and if i use winapi i get a error no drive slected as it does not show in the drop down in the right(which doesn't matter i'v been told).

i have 4 of each ix1.51 79 and orig79.bin files in my J/F folder.

not sure what i'm doin wrong as i've used the same computer to flash 59 and benq!!!!!!

please help anyone

thanks

one more thing sometime the computer start to freeze when connected

[docwarbucks]

try jf 1.55 and use port IO. check ram upload method. make sure you get it into mode b. sometimes hitachis can be a pain in jf. you will probally have better luck with port io support in 1.55 then the newer versions

[funkysy]

try jf 1.55 and use port IO. check ram upload method. make sure you get it into mode b. sometimes hitachis can be a pain in jf. you will probally have better luck with port io support in 1.55 then the newer versions

thanks for your help 1.55b J/F is working