flashing spare drive for same xbox 360

[jay]

Hi I've flashed my drive to1.61 with iprep and I have saved the back up file.I have a new spare benq that I would like to have as a back up on the same xbox as I've had 2 drives break on me.How do you go about it?Do you read the original drive and then swap the drives mid flash to write to the new one?Or does anyone know a good tutorial for changing drives that could help.I would still need the original to work as well as the second so I could just swap them any time if I mess up flashing one in future.Thanks -Jay

[HaGGardSmurf]

All you need is the OFW from the drive in the xbox...

1) Open Jungle Flasher
2) Load the OFW as source
3) Load BenQ 1.61 (or LT when it comes out)
4) Click spoof source to target
5) Save the firmware somewhere

If your using iPrep, make your stick, then put your cfw in your backups\1234567\12345 folder\, then use the "fben 1234567 12345 w" command.

If your using jungleflasher, send the magic keys, write the FW, send outro. (At no point should you use the erase command)

[CoFree]

just falsh it like a restore

have a read over this.
http://www.robinhoodsplayground.com/for ... =197&t=196" onclick="window.open(this.href);return false;
just input any firmware that will go in
it will be a old one

then just put a copy of your hacked firmware
that was made when you flashed your main dvd drive
as long as you have 2 of the same dvd drives

if they are different you will need to rebuild your hacked firmware with jungle flasher first

[CoFree]

as you can see there is more than one way to skin a cat.

[jay]

Thanks Again! Don't know what I'd do without this site and the people who are so happy to help.The best on the net!!!!