it reads the firmware no problems,its when i come to write it freezes on bank 0 drive has been flashed before,using tray half open and intro/device id. Any help please.
B.C.F.C
benq freezing
benq freezing
Trying to flash a Benq drive using lastest jungleflasher via card drivers diabled and file deleted
it reads the firmware no problems,its when i come to write it freezes on bank 0 drive has been flashed before,using tray half open and intro/device id. Any help please.
B.C.F.C
it reads the firmware no problems,its when i come to write it freezes on bank 0 drive has been flashed before,using tray half open and intro/device id. Any help please.
B.C.F.C
-
staningrimsby
- Bandit
- Posts: 130
- Joined: Fri Feb 06, 2009 3:12 pm
Re: benq freezing
Have you tried using i-prep 10.7 its a bit more reliable than JF.
Re: benq freezing
Have been using 10.7 had the same with jungleflasher,since then i've done 2
benq drives with jungleflasher with no problems,could it be that drive its got 1,4 on it at the moment.
benq drives with jungleflasher with no problems,could it be that drive its got 1,4 on it at the moment.
Re: benq freezing
If you have your firmware best to just use iprep. happen to me many times using jungle flasher and i always got it working using iprep