I´ll have a couple of the 93450´s to flash.The soldering part isn´t the hardest part but I would like to do them in Dos.
Like I always did the old Lite-On´s.I´ll use JF to get the key and spoof the FW but the erasing and flashing is more stable in Dos(my personally thought).So what do think of using the "modified USB-stick to do the reading of the newest Lite-On´s
and the use JF to build the FW.Then back to Dos and L-O-ERAS and flash the drive???
If anyone have any ideas or tutorial please share them.
The new Lite-On´s 93450 & 83850 in DOS
-
commando_lee
- Ally of Robinhood
- Posts: 1821
- Joined: Sun Apr 26, 2009 12:50 pm
- Location: Up high in the tree looking out for the Sheriff of Nottingham
Re: The new Lite-On´s 93450 & 83850 in DOS
have a look at iprep 11.6 its stable on works great
................................................................RobinHoods Very Own
.......................................
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
.......................................
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
Re: The new Lite-On´s 93450 & 83850 in DOS
from what i read
it my understanding there is a few 9300 drives that have a different flash chip on them
and
dos flash does not work 100% on them
make sure you get a good key
before you erase and flash
it my understanding there is a few 9300 drives that have a different flash chip on them
and
dos flash does not work 100% on them
make sure you get a good key
before you erase and flash
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
No Questions by PM.
No Questions by PM.