How hard would it be to flash my 360
How hard would it be to flash my 360
I've got a LiteOn FW Ver - 93450C , hard to flash this drive?
The Monster
Intel Xeon X3360 @ 4.0Ghz 1.32V - Xigmatek S1283EE 2x120 Push/Pull - Asus P5Q Deluxe - 8 GB Mushkin Redline DDR1000 5-5-5-12 - Twin ATI XFX 4890 2GB CrossFireX - Soundblaster X-Fi Extreme - Twin Velociraptor 300GB RAID0 OS/Game + WD 500GB - Corsair 750TX - Modded Antec 300
Intel Xeon X3360 @ 4.0Ghz 1.32V - Xigmatek S1283EE 2x120 Push/Pull - Asus P5Q Deluxe - 8 GB Mushkin Redline DDR1000 5-5-5-12 - Twin ATI XFX 4890 2GB CrossFireX - Soundblaster X-Fi Extreme - Twin Velociraptor 300GB RAID0 OS/Game + WD 500GB - Corsair 750TX - Modded Antec 300
-
HaGGardSmurf
- Ally of Robinhood
- Posts: 4088
- Joined: Tue Feb 03, 2009 9:46 am
- Location: Alberta, Canada
Re: How hard would it be to flash my 360
You need to do hardware modifications to the drive in order to read it.
You need to cut a couple traces, and either use a home made probe or buy and solder in the lt switch.
You can also wait a little while for the probe v2 to be released, and you can use it. Again, you will still need to cut traces then repair them after reading the drive.
You need to cut a couple traces, and either use a home made probe or buy and solder in the lt switch.
You can also wait a little while for the probe v2 to be released, and you can use it. Again, you will still need to cut traces then repair them after reading the drive.
Re: How hard would it be to flash my 360
Sounds like a pretty big pita haha
The Monster
Intel Xeon X3360 @ 4.0Ghz 1.32V - Xigmatek S1283EE 2x120 Push/Pull - Asus P5Q Deluxe - 8 GB Mushkin Redline DDR1000 5-5-5-12 - Twin ATI XFX 4890 2GB CrossFireX - Soundblaster X-Fi Extreme - Twin Velociraptor 300GB RAID0 OS/Game + WD 500GB - Corsair 750TX - Modded Antec 300
Intel Xeon X3360 @ 4.0Ghz 1.32V - Xigmatek S1283EE 2x120 Push/Pull - Asus P5Q Deluxe - 8 GB Mushkin Redline DDR1000 5-5-5-12 - Twin ATI XFX 4890 2GB CrossFireX - Soundblaster X-Fi Extreme - Twin Velociraptor 300GB RAID0 OS/Game + WD 500GB - Corsair 750TX - Modded Antec 300
-
HaGGardSmurf
- Ally of Robinhood
- Posts: 4088
- Joined: Tue Feb 03, 2009 9:46 am
- Location: Alberta, Canada
Re: How hard would it be to flash my 360
It sounds alot harder than it is.
-
supermanx2
- Peasant
- Posts: 13
- Joined: Sun Mar 21, 2010 1:41 am
Re: How hard would it be to flash my 360
I went with this option: Xtractor 1.1, Vampire, and a rebuild board. It is not too tough. Follow their tutorial for the cutting, installation and then use JungleFlasher tutorial to read the drive. I am a newbie to this, but got it working. I had problems with getting the VIA card finding the port to the drive (once you connected the drive), but after some time, got it working fine. It was actually quite fun. I did it for the fun of it!
http://www.360xtractorpro.com/360xtractorpro/index.html" onclick="window.open(this.href);return false;
http://www.360xtractorpro.com/360xtractorpro/index.html" onclick="window.open(this.href);return false;