Need help with Moding my xbox 360

[AlpharathT25]

I have a liteon 74850c which I was trying to flash with a ck3 blaster kit. I wanted to keep my liteon 74850c with OFW and flash a benq with my liteon's data. I have the data from the liteon but I have somehow managed to brick my benq and liteon drive both while using jungleflasher. I have found some videos on youtube trying to explain how to unbrick the drives. I tried one video with a xbox 360 boot disk and that did not unbrick my drive. Im not really sure what to do next. Can you tell me what programs I should use to unbrick both of my drives or should I be looking into buying a new xbox 360? Thank you for your time and help.

[CoFree]

you have to make sure you have a good key
from your liteon drive
if you do we should be able to get them going
but
the lite on will not be stock anymore if you have erased it
you will have to put a hacked firmware on it

so there will be no reason to use the benq at this point

if you dont have a good dump from your lite on with a good key
then its over
tell us what files you have from when you dumped your lite on

dont trash anything from this point on.

[AlpharathT25]

Ok, I have the dummy.bin, identify.bin, inquiry.bin, key.bin, and the serial.bin . I also have the jf file when I dumbed all of the information off of my liteon.

[CoFree]

open as source the dummy.bin with jungle flash
look at the key and see what it is
that is something you can pm me so i can have a look at the key to make sure its good
dont post it on the open board

[CoFree]

your key looks fine
so as long as you get a good flash
at this point will the orig dvd drive work in the console.
if it will just start from the beginning with jungle flasher
or iprep
here is a guide on flashing the 74 dvd drive


this is with iprep


if it will not work in the console that would mean you have a bad flash or no flash in the drive
if you are going to use the benq i would use iorep and flash the hacked firmware in like a restore like this
http://www.robinhoodsplayground.com/for ... =197&t=196" onclick="window.open(this.href);return false;
if you are going to use the liteon just use jungle flasher
load the dummy bin in as sourse and the hacked firmware in as target and buikld and flash like normal.
just use the guide up top

you woulde want to use the lastest jungle from the programs thread

[AlpharathT25]

No, both drives are bricked and when I try to start them up I get the one RROD for a hardware issue. Which way do you think would be best to unbrick the drives? I have tried to use an xbox 360 boot disk but that did not work. I herd Iprep is a good program for unbricking but I have never used it. I'm going to watch all of the vids you posted but I just wanted to know you imput on what would be best for a novice.

[CoFree]

ok wait man
if you put ether dvd drive in the console and start it you should not get rrod
you should get a error 65 on the screen
if you look here you can see a complete list of the error codes
http://www.robinhoodsplayground.com/for ... 101&t=2962" onclick="window.open(this.href);return false;

even if it a rrod you still need to get the error code to see what is wrong with it
if it a 102 error
you are not going to fix it with just a firmware in your dvd drive

[AlpharathT25]

I pluged it into my TV it was error 64 which was the dvd drive, its got to be something wrong with the drive because jungleflasher used to pick up both of my drives and now when I try and use them it freezes my computer.

[CoFree]

ok if it is locking up
then you can do this
http://www.robinhoodsplayground.com/for ... 195&t=3226" onclick="window.open(this.href);return false;

[AlpharathT25]

Ok I have Iprep 0.12.2.1 and I am trying to find the ixtreme dos file. I think I have everything else that I will need. I spoofed the OFW with the CFW for my data, have Iprep, I have a back up of all my original data so I think Im good to but for the Ixtreme dos file in the video. I looked on Xbins but I could not find it. What FW should I be flashing to? I'm looking at the 1.1LT because it looks like it would be the best one so Microsoft will not detect it in the xbox 360 on xbox live. Thanks for all of your help and imput on this.

[CoFree]

no man
you will need to use the older iprep like i used in the video
im sure the new iprep will do it
but
ive not even seen it
so cant tell you how

[AlpharathT25]

Ok, where do I get the dos files?

[CoFree]

http://www.robinhoodsplayground.com/for ... 195&t=3226" onclick="window.open(this.href);return false;

its part if iprep 6.2
man i had linked to that before

[AlpharathT25]

I know you posted the video, what I can not find is the Ixtreme 1.5 firmware. I looked on the downloads for this forum, xbins, and ixtreme.net . The lowest firmware I could find is Ixtreme 1.6 and that would not load on iprep 6.2. Can you give me a link for ixtreme 1.5 please?

[CoFree]

it IS on xbins
you just get any of the old firmware like v52 samsung firmware from in the "old" folder on xbins
it dont matter what one as long as it will load because you are going to trash every thing but the dos stuff and boot file
like the vid shows