hitachi key in benq drive
hitachi key in benq drive
hi guys just wondering what is the best way to spoof a hitachi key into a benq drive my sons drive as packed up i have a new benq drive i can put in n
-
HaGGardSmurf
- Ally of Robinhood
- Posts: 4088
- Joined: Tue Feb 03, 2009 9:46 am
- Location: Alberta, Canada
Re: hitachi key in benq drive
Dump the hitachi, get its key. (or load the ofw, if youve dumped it before)
Load up jungle flasher, open the hitachi ofw as source, then open benq LT as target (or dump/download the benq's OFW if you want the drive to be stock, and load that as source)
Hit spoof, the key will be copied over, then hit save, and save that. Now you can flash with iPrep or jungle, whatever your more comfortable with.
Load up jungle flasher, open the hitachi ofw as source, then open benq LT as target (or dump/download the benq's OFW if you want the drive to be stock, and load that as source)
Hit spoof, the key will be copied over, then hit save, and save that. Now you can flash with iPrep or jungle, whatever your more comfortable with.
-
southbound
- Bandit
- Posts: 108
- Joined: Wed Mar 31, 2010 9:49 pm
Re: hitachi key in benq drive
This Is your detailed Jungle Flasher tutorial.
(if you don't have A saved backed up firmware of the hitachi and you only have the key,were get to that later)
First Load up your hitachi firmware, In 'open Firmware Tool 32' as source,then deppending If your going to be using the drive to play backed up games,If so your need the new lt benq 1.2 to load as Target.If not your have to find some original stock benq firmware to load as target.Click spoof source to target,your hitachi key will now appear In the target firmware key path which Is your benq firmware.NOW click save,save as cfw.bin to where ever.NOW to check If the key has successfully spoofed into the benq firmware, load up jungle flasher again and open your new firmware as source,If successful It should say underneath 'Dvd key @' spoofed as hitichi.Now close Jungle Flasher,plug your benq drive into the cumputer,you should know how,turn the drive on with tray half open,load up Jungle Flasher,make sure Jungle Flasher recognises the drive,NOW In ' MTK Flash 32' click on Benq unlock,unlock the drive,NOW click read firmware,this is where you can save what ever key or firmware you have on the drive.NOW load that up as source,auto load or manual.NOW load in your spoofed hitachi key benq firmware as target,NO need to click spoof source to target as that wouldn't help because that's not the key you want In that drive.NOW go over to 'MTK Flash 32' and click write.That will erase the firmware that's on the benq drive and replace with the benq firmware and your hitachi key.
Further-more...If you just have the hitachi key that you can only copy and paste,then spoof the key in by using 'Firmware toolbox' load up the benq firmware,paste in the key and click save.NOW check In jungle Flasher to see If successful.And go from there instead.
southbound
Ps, Can anyone help me with tsop xbox 1 flashing?
(if you don't have A saved backed up firmware of the hitachi and you only have the key,were get to that later)
First Load up your hitachi firmware, In 'open Firmware Tool 32' as source,then deppending If your going to be using the drive to play backed up games,If so your need the new lt benq 1.2 to load as Target.If not your have to find some original stock benq firmware to load as target.Click spoof source to target,your hitachi key will now appear In the target firmware key path which Is your benq firmware.NOW click save,save as cfw.bin to where ever.NOW to check If the key has successfully spoofed into the benq firmware, load up jungle flasher again and open your new firmware as source,If successful It should say underneath 'Dvd key @' spoofed as hitichi.Now close Jungle Flasher,plug your benq drive into the cumputer,you should know how,turn the drive on with tray half open,load up Jungle Flasher,make sure Jungle Flasher recognises the drive,NOW In ' MTK Flash 32' click on Benq unlock,unlock the drive,NOW click read firmware,this is where you can save what ever key or firmware you have on the drive.NOW load that up as source,auto load or manual.NOW load in your spoofed hitachi key benq firmware as target,NO need to click spoof source to target as that wouldn't help because that's not the key you want In that drive.NOW go over to 'MTK Flash 32' and click write.That will erase the firmware that's on the benq drive and replace with the benq firmware and your hitachi key.
Further-more...If you just have the hitachi key that you can only copy and paste,then spoof the key in by using 'Firmware toolbox' load up the benq firmware,paste in the key and click save.NOW check In jungle Flasher to see If successful.And go from there instead.
southbound
Ps, Can anyone help me with tsop xbox 1 flashing?