Help With Unbricking My Lite-On 74850c Drive Help Please

[M930mike]

Hello Everyone My Name Is Mike


I Have a lite-On 7458c Drive That's Bricked I Have Use This Tutorial Here In The Forum
I used Iprep 009 To Make The USB Boot Device
The Device Is A Scan Disk 2 GB
I have A VT6421A SATA Card
CK3 Pro With Probe
I'm Running Windows XP SP2 Upgraded To SP3 Media Edition
Jungle Flasher 1.60 Beta



http://robinhoodsplayground.com/forum/v ... 197&t=7041


I Have Read Through The Tutorial And Followed It Correctly Until I Got To The Part Where It Says
Erasing Finished!
Then It SAYS NOW TURN YOUR LITE-ON OFF TEN BACK ON
And Then Its Say PRESS ANY KEY TO CONTINUE



Question Do I Turn My Drive On And Off Before I Press Any Key To Continue or After I Press Continue?

Next Its Say

0)0x01DF0 IDE Pri Master None
1)0x01F IDE Pri Slave ATAPI Philips DVD+/-RW DVD8801 4D28
MTK Vendor Intro Failed On Port 0x01F0.
If You Choose To Resend The Command You Should Turn The Device Off And On After You Pressed "Yes"
Do You Want To Resend The Command Until The Drive Responds (Y/N)? If I Choose Yes The Status Code It Flickers Between 50 And 51.
Then I Would Choose Abort Because I Let It Flicker For Like Two Minutes

Then It Say This After I Click ESC To Abort

Flash Manufacturer ID: 0x00, DeviceID: 0x00
Flash Type: MTK Vendor Intro Failed
Flash Size: 0 Bytes (0 KB)
2) 0x0170 IDE Sec Master None
3) 0x0170 IDE Sec Master None
4) 0xB8A0 SATA Pri Master ATAPI No Identify Possible
Flash Manufacturer ID: 0xEF, DeviceID: 0x011
Flash Type: Winbond/NEX(W25P20/W25X20/NX25P20)
Flash Size: 262144 Bytes (256 KB)
5) 0xB8B0 SATA Pri Master None
6) 0xB8C0 IDE Pri Master None
7) 0xB8C0 IDE Pri Slave None

Enter The Number Of An ATAPI Drive:


It Keeps Giving Me A Failed Help Please

[trevos]

I Have Read Through The Tutorial And Followed It Correctly Until I Got To The Part Where It Says
Erasing Finished!
Then It SAYS NOW TURN YOUR LITE-ON OFF TEN BACK ON
And Then Its Say PRESS ANY KEY TO CONTINUE


turn your lite-on off then back on then press any key

[djshauny1]

you need to select the 4th drive
where it says no identity possible

also make sure all hard drives and dvd drives are unplugged accept for your 360 drive

[djshauny1]

let us know how you get on

[bsammy]

@M930mike, damn man, i feel your pain, had the same thing happen to me w/ my 7000 liteon. just keep trying the lo-eras method, youll get it. good luck

[massy086]

http://www.youtube.com/watch?v=Qp2QuLCk ... re=related" onclick="window.open(this.href);return false;