dont want to flash with jungleflasher question ?

The place for more technical questions about modding your Xbox 360!
Post Reply
logicwatch
Peasant
Peasant
Posts: 14
Joined: Sat Jun 20, 2009 5:00 am

dont want to flash with jungleflasher question ?

Post by logicwatch »

Hi

I wish to reflash my liteon 74850c from LT to LT+ I have the original dummy.bin and have created the new LT+ firmware using firmtool in jungleflasher and saved
the new created Lite_CFW.bin file .
however I have had numerous issues with my PC freezing despite trying the usual via freeze fixes so I wish to avoid the heartache of yet another bad flash by using
dos flash / iprep ?
my first question is can I still erase and flash this Liteon 74850c with a boot usb
and secondly do these older programs still support this method on this drive
and finally how do I do this ?
I have searched around but cannot find anything detailed for just erasing and then flashing with dos/iprep + exact commands ?
I have a CK3 and via card

many thanks in advance for any help guys :)
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: dont want to flash with jungleflasher question ?

Post by CoFree »

you should be able to just flash in the firmware as long as its named right for the version of iprep you have
have a look at this.
you would only have to do the flashing part
http://www.robinhoodsplayground.com/for ... 195&t=3226" onclick="window.open(this.href);return false;
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
User avatar
HaGGardSmurf
Ally of Robinhood
Ally of Robinhood
Posts: 4088
Joined: Tue Feb 03, 2009 9:46 am
Location: Alberta, Canada

Re: dont want to flash with jungleflasher question ?

Post by HaGGardSmurf »

dosflash and iprep will always support the flashing of the drives, but they dont support building new CFW's. Which means anything pre LT (I believe?) you can dump the drive and have it build your FW, then flash.

If you want to flash LT or LT+ you will need to dump the drive, then use jungle flasher to build the hacked FW, then boot back into dosflash, and flash the drive with your pre made FW.
logicwatch
Peasant
Peasant
Posts: 14
Joined: Sat Jun 20, 2009 5:00 am

Re: dont want to flash with jungleflasher question ?

Post by logicwatch »

the video link is helpful but leaves certain questions unanswered like

1. my drive is not recovering from a bad flash ( I have made up the LT+ in jungleflasher ready to flash new cfw file )
so the drive has not been erased .
2.so will iprep perform a flash of the liteon drive as well as writing ?
3.if so what are the erase commands ?
4. is iprep able to cope with the new LT+

regards
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: dont want to flash with jungleflasher question ?

Post by CoFree »

ive not done this man
so im not 100%
but it should work
this is just a work around if you dont/cant use jungle to do your flashing

logicwatch wrote:2.so will iprep perform a flash of the liteon drive as well as writing ?
flash/writing is the same thing
yes it should
logicwatch wrote:3.if so what are the erase commands ?
it starts at about 8:30 on the vid
logicwatch wrote:4. is iprep able to cope with the new LT+
not sure ive not did this

here is the vid

FULLSCREEN
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
Post Reply

Return to “360 DVD Drive Flashing”