Bad flash

The place for more technical questions about modding your Xbox 360!
Post Reply
Garb
Peasant
Peasant
Posts: 6
Joined: Sun Oct 12, 2008 9:21 am

Bad flash

Post by Garb »

Pls. help
I flashed my lite-on drive with wrong key, after i installed it on the xbox i realised that it was the wrong key because no respons when i tied to eject the drive.
Then i tried to run dosflash with lite-on erase, but i do not get any contact with the drive,is drive broken or is there a way to recover the drive.
Thank for any help.
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: Bad flash

Post by CoFree »

well it cant just be the wrong key
it would still work fine just not boot a game

so it has to be a bad flash

there are ways to recover from a bad flash
but you have to have your good firmware with good key

here is a guide that should help

you will have to hunt down the older programs but they are all on the site here
have a look over this
http://www.robinhoodsplayground.com/for ... 195&t=3226" onclick="window.open(this.href);return false;
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
Garb
Peasant
Peasant
Posts: 6
Joined: Sun Oct 12, 2008 9:21 am

Re: Bad flash

Post by Garb »

Thank you for the quick anwser.
I alredy tried this very good guide and i have used this before, but it continue give me ff80 and not ff72 and i know its not my via6421 because i tried to spoof and old hitachi with the key from my lite-on with jungle flasher works fine.
User avatar
HaGGardSmurf
Ally of Robinhood
Ally of Robinhood
Posts: 4088
Joined: Tue Feb 03, 2009 9:46 am
Location: Alberta, Canada

Re: Bad flash

Post by HaGGardSmurf »

iPrep does not like VIA chipset's try using an onboard port.

Lots of times the lite-on will not return 72 status right away, just keep resending the command.
Garb
Peasant
Peasant
Posts: 6
Joined: Sun Oct 12, 2008 9:21 am

Re: Bad flash

Post by Garb »

Just for info.
I got my drive to work again, i just want to explain what went wrong for me, mayby this can help others in the future.

1. Somehow i flashed my lite-on drive with wrong key and i used dosflash with iprep and with the drive half open.
2. Installed the drive i the xbox there was no contact with the drive and unable to close or eject the drive.
3. I tried again to run dosflash with the tray half open, but unable to get contact with the drive, i only gor the ff80 and no ff72.
4. After serveral attempts i tried to do it with the tray closed, then i got contact with the drive, and was able to use dosflash i then flashed it with the correct key this time.
5. Then i installed the drive in the xbox again and i got and error massage and the drive would not open.
6. Then i open the drive and manual open the tray to half open.
7. I flashed the drive again with dosflash.
8. Intalled the drive in the xbox and then the drive works fine :D .

I just want to say thank you for the quick answer and for a very nice guide how to do.
User avatar
HaGGardSmurf
Ally of Robinhood
Ally of Robinhood
Posts: 4088
Joined: Tue Feb 03, 2009 9:46 am
Location: Alberta, Canada

Re: Bad flash

Post by HaGGardSmurf »

Good job man. Liteon's are almost always recoverable, but they can be a pain sometimes :?
Post Reply

Return to “360 DVD Drive Flashing”