Solderless adapter instead of probe! (liteon drive) - mrc

[rory09]

http://www.robinhoodsplayground.com/for ... 134&t=3396" onclick="window.open(this.href);return false;

working method could anyone tell me what buttons to press in jungleflasher
dvdkey32 is only used when your using the probe i think must be mtk could anyone help?

thanks

Edit - only possible with CK3 lite

[CoFree]

what drive are you playing with

[rory09]

liteon dg16d2s 74850c

correct me if im wrong but basicly shorting between the 2 points of r707 allows the key to be read, checked it with my multimeter between the points i get like 0.05 ohm i do electronics at work mainly checking tracks on pcbs so i believed this was ok. have used jungle flasher to flash benq and sammy but liteon is completely different, does it even have a mode b?

[CoFree]

you have to solder the 707 point for the drive to dump or you have to use a probe

you have to have a path for the data to get out to your oc
have a look over the guide area
http://robinhoodsplayground.com/forum/v ... 195&t=7783" onclick="window.open(this.href);return false;
http://robinhoodsplayground.com/forum/v ... 97&t=13265" onclick="window.open(this.href);return false;

[rory09]

Thanks but i have decided due to no more information on it in any guide im just going to buy the probe bundle,means in future i can do my friends drives too

thanks

[CoFree]

Edit - only possible with CK3 lite

well you can get the ck3 pro also
it cost a little ore money but it has a usb hook up not just a rs232 port