got new via card , still no joy help!

The place to ask your questions about the Xbox 360
User avatar
themusicsoulchild
Bandit
Bandit
Posts: 51
Joined: Thu Mar 06, 2008 8:09 pm

got new via card , still no joy help!

Post by themusicsoulchild »

got new via card ... installed drivers, unplugged all other drives, went into bios no metion of my sata via vt chipset!

anyway went to i prep and it cant detect my drive or card! wtf? i swear it dont like me?
La Cosa Nostra
User avatar
parminder
Ally of Robinhood
Ally of Robinhood
Posts: 695
Joined: Wed Nov 28, 2007 1:23 pm
Location: Birmingham/uk

Re: got new via card , still no joy help!

Post by parminder »

what via card is it, try using different pci slot and only update the drivers for the card which are from the cd which came with it.
flashed 16 benQ, 8 Sams25, 3 sam28, 2 hit 0059dj, 2 0047dh 3 0047dj, still stuck on 0078fk, failed 0047dj hardware

Image
User avatar
themusicsoulchild
Bandit
Bandit
Posts: 51
Joined: Thu Mar 06, 2008 8:09 pm

Re: got new via card , still no joy help!

Post by themusicsoulchild »

its the vt6421a and i will try a different pci slot now! speak soon
La Cosa Nostra
User avatar
Jman 31
Ally of Robinhood
Ally of Robinhood
Posts: 916
Joined: Wed Nov 07, 2007 2:51 pm
Location: Somewhere in the south

Re: got new via card , still no joy help!

Post by Jman 31 »

Make sure the card is fully seated in the pci slot.
ROBINHOOD'S PLAYGROUND
sadalius
Robinhood
Robinhood
Posts: 4039
Joined: Wed Nov 07, 2007 6:06 pm

Re: got new via card , still no joy help!

Post by sadalius »

When you installed the card and booted into windows, did windows find new hardware?
Sadalius

No questions by PM please
User avatar
themusicsoulchild
Bandit
Bandit
Posts: 51
Joined: Thu Mar 06, 2008 8:09 pm

Re: got new via card , still no joy help!

Post by themusicsoulchild »

okay swaped pci slot installed drivers. accepted... tried again same old routine. iprep does not pick up ixtreame drive. no drives detected! both xbox and pc powered at same time also tried many different powering up methods still no joy. it seems as if the chip set is installed but unable to connect my drive ..... i also tried to connect my drive in windows and it just freezes .so i disconnect after 10 sec it unfreezes, so it knows its there but wont pick it up... ?????
La Cosa Nostra
User avatar
themusicsoulchild
Bandit
Bandit
Posts: 51
Joined: Thu Mar 06, 2008 8:09 pm

Re: got new via card , still no joy help!

Post by themusicsoulchild »

windows found hardware and all driver are working perfectly.... however the via tool wont pick up my xbox sata drive it will only freeze me out.. so what can i do?
La Cosa Nostra
User avatar
parminder
Ally of Robinhood
Ally of Robinhood
Posts: 695
Joined: Wed Nov 28, 2007 1:23 pm
Location: Birmingham/uk

Re: got new via card , still no joy help!

Post by parminder »

can you provide us with more detail
flashed 16 benQ, 8 Sams25, 3 sam28, 2 hit 0059dj, 2 0047dh 3 0047dj, still stuck on 0078fk, failed 0047dj hardware

Image
User avatar
parminder
Ally of Robinhood
Ally of Robinhood
Posts: 695
Joined: Wed Nov 28, 2007 1:23 pm
Location: Birmingham/uk

Re: got new via card , still no joy help!

Post by parminder »

themusicsoulchild wrote:windows found hardware and all driver are working perfectly.... however the via tool wont pick up my xbox sata drive it will only freeze me out.. so what can i do?
change the port try using the port which is nearer to the computer and see what happens
flashed 16 benQ, 8 Sams25, 3 sam28, 2 hit 0059dj, 2 0047dh 3 0047dj, still stuck on 0078fk, failed 0047dj hardware

Image
User avatar
themusicsoulchild
Bandit
Bandit
Posts: 51
Joined: Thu Mar 06, 2008 8:09 pm

Re: got new via card , still no joy help!

Post by themusicsoulchild »

via vt6421a placed in pci slot 2 fully functioning drivers. 5.1.6.
phoenix award bios cmos setup utility.
unable to select a raid comliant option however it will allow me to boot from scsi?
when iprep is booted it does not pick any drives?
i try in windows and it freezes computer!
what else would you like to know?
La Cosa Nostra
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: got new via card , still no joy help!

Post by CoFree »

what drive are yo trying to flash.
make sure the card is working.
try a ide drive of some kind any thing to make sure the card is good
is the card showing good in the device manger
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
User avatar
themusicsoulchild
Bandit
Bandit
Posts: 51
Joined: Thu Mar 06, 2008 8:09 pm

Re: got new via card , still no joy help!

Post by themusicsoulchild »

in device manager card is showing good... i will attach an ide drive to see if it works.
La Cosa Nostra
User avatar
themusicsoulchild
Bandit
Bandit
Posts: 51
Joined: Thu Mar 06, 2008 8:09 pm

Re: got new via card , still no joy help!

Post by themusicsoulchild »

card is not picking up my ide drive either?
La Cosa Nostra
User avatar
themusicsoulchild
Bandit
Bandit
Posts: 51
Joined: Thu Mar 06, 2008 8:09 pm

Re: got new via card , still no joy help!

Post by themusicsoulchild »

wow i got it to work!
for some stupid reason it will only pick up the drive using the back sata port facing the drives... why?

any away about to dump!
La Cosa Nostra
User avatar
MsK
Ally of Robinhood
Ally of Robinhood
Posts: 652
Joined: Tue Jan 08, 2008 3:42 pm
Location: Nottingham / UK

Re: got new via card , still no joy help!

Post by MsK »

themusicsoulchild wrote:wow i got it to work!
for some stupid reason it will only pick up the drive using the back sata port facing the drives... why?

any away about to dump!
Typicly it is always the port at the end of the card - not the external or the top port.
You was told this earlier ;)


parminder wrote:
themusicsoulchild wrote:windows found hardware and all driver are working perfectly.... however the via tool wont pick up my xbox sata drive it will only freeze me out.. so what can i do?
change the port try using the port which is nearer to the computer and see what happens
I'm glad you got it sorted happy flashing ;)
Image
Post Reply

Return to “Beginners”