Here's the specs
1. Power by VIA 6421 Chip - SATA RAID + ATA133/100
2. Internal Interface 2 x Serial ATA 150 + 1 x ATA 133
3. External Interface 1 x SATA 150
4. 3 Ports SATA supports RAID 1/0 0+1, and PIO mode 4/3/2/1/0
5. Support 32 bit hard disk mode >147MB
6. Supports Microsoft generic IDE operation and Intel bus master DMA operations.
7. Supports two independent Serial ATA ports with data transfer rate up to 1.5Gb/s.
8. Support Windows 95, 98, 98SE, ME, NT4.0, 2000 and XP
9. PCI interrupt sharing and coexists with main board IDE controller
10. Plug and Play
Components Included:
1 x PCI SATA card
1 x Driver CD
1 x SATA cable
Do you guys know what drives I should be able to flash with it?
PS. I flashed a hitachi 0078fk using my nForce 3 MB sata port, but wasn't able to get good status for a benq drive. Thats why I bought the above 3 port SATA Serial ATA Raid + IDE Controller PCI Card.
I'll let you know the results, but any opinions in the meantime would be appreciated. Thanks
