Just a Quickie :)

[stevieboy2k]

Back Again

Ive currently got 9 coasters sitting in front of me and im getting really confused.....ive gota pioneer drive\verbatim discs and ive used imgburn with no joy ...im including the imgburn log so someone can tell me ive been a complete noob and not ticked a box please help
I 17:03:12 Source File Sectors: 3,825,924 (MODE1/2048)
I 17:03:12 Source File Size: 7,835,492,352 bytes
I 17:03:12 Source File Volume Identifier: XGD2DVD_NTSC
I 17:03:12 Source File Volume Set Identifier: 34672923
I 17:03:12 Source File Implementation Identifier: Sonic Scenarist 3.1
I 17:03:12 Source File File System(s): ISO9660, UDF (1.02)
I 17:03:13 Destination Device: [0:0:0] PIONEER DVD-RW DVR-112D 1.09 (D:) (ATA)
I 17:03:13 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-02) (Speeds: 2.4x)
I 17:03:13 Destination Media Sectors: 4,173,824
I 17:03:13 Write Mode: DVD
I 17:03:13 Write Type: DAO
I 17:03:13 Write Speed: 2.4x
I 17:03:13 Link Size: Auto
I 17:03:13 Test Mode: No
I 17:03:13 OPC: Yes
I 17:03:13 BURN-Proof: Enabled
I 17:03:49 Optimal L0 Data Zone Capacity: 1,913,760
I 17:03:49 Optimal L0 Data Zone Method: Copied From Original Disc
I 17:03:50 Filling Buffer... (40 MB)
I 17:03:52 Writing LeadIn...
I 17:03:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)
I 17:03:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)
I 17:03:53 Writing Layer 0... (LBA: 0 - 1913759)
I 17:23:57 Writing Layer 1... (LBA: 1913760 - 3825923)
I 17:44:07 Synchronising Cache...
I 17:44:08 Closing Track...
I 17:44:09 Finalising Disc...
I 17:45:10 Exporting Graph Data...
I 17:45:10 Graph Data File: C:\Users\stevie\AppData\Roaming\ImgBurn\IBG Files\PIONEER_DVD-RW_DVR-112D_1.09_01-APRIL-2008_17-03_RICOHJPN-D01-02_2.4x.ibg
I 17:45:10 Export Successfully Completed!
I 17:45:10 Operation Successfully Completed! - Duration: 00:41:57
I 17:45:10 Average Write Rate: 3,169 KB/s (2.3x) - Maximum Write Rate: 3,375 KB/s (2.4x)

[MsK]

Well.. it looks ok but your log does not look exactly the same as mine - 2bh I mainly use clonecd

Have you set the layer break as explained here : http://www.robinhoodsplayground.com/for ... =117&p=267 ?

& also.. did you load in the .dvd index file & *not the image file* itself??

I have also noticed that your 112D is running an older firmware - not that it should matter to be honest - but you can update it

http://www.pioneer.eu/eur/content/suppo ... tware.html

DVR-112D, DVR-112DBK, DVR-112DSV
DVR112D_FW124EU.zip - Firmware Upgrade Ver. 1.24 New! (13/12/2007)

If you have done everything as you should I would raise doubts about the actual integrity of the image you are trying to burn - try dumping it again

[MsK]

I 17:03:49 Optimal L0 Data Zone Capacity: 1,913,760
I 17:03:49 Optimal L0 Data Zone Method: Copied From Original Disc

In actual fact on closer inspection I think this could be your problem! specify the layer break as detailed in cofree's tutorial which I linked to above

I rarely use imgburn tho! so I could be wrong

[stevieboy2k]

Well my last disc is now sitting under my cup of coffee and i assumed that i had to just manually set the layer break to 1913760 which i did....im gonna update my firmware tonight on the off chance and in the next couple of days purchace some more blanks, has anyone ever brought these below
http://www.kanection.co.uk/product.php/ ... --25-pack-
Also i get 99% of my stuff from xxxxxxxxx which have been a great supplier over the years, so i dont think it is a issue with iso's

[MsK]

Well my last disc is now sitting under my cup of coffee and i assumed that i had to just manually set the layer break to 1913760 which i did....im gonna update my firmware tonight on the off chance and in the next couple of days purchace some more blanks, has anyone ever brought these below
http://www.kanection.co.uk/product.php/ ... --25-pack-
Also i get 99% of my stuff from bitsoup which have been a great supplier over the years, so i dont think it is a issue with iso's

where did you set the layer break??
From the looks of the log it is calculating optimal...

[stevieboy2k]

yeah sorry that log i uploaded i was trying to use optimal on the off chance i was doing something wrong

[MsK]

...Also i get 99% of my stuff from bitsoup which have been a great supplier over the years, so i dont think it is a issue with iso's

I didn't read this 1st time round!!
you won't receive anymore direct support on this subject!

[stevieboy2k]

apologies

[CoFree]

well man the problem is that its very hard to help when we dont know for sure you have a good dump.
yes of course there are good iso to be downloaded but that is just another reason we dont get our iso from download.
you never know what you will get.

i believe there have been iso that check out by all the check programs we can do and they are still bad.

when all else fails start over.
try a different burner.

if you have the 2 files a dvd file (very small)
and a iso file (the big iso)

if you have a iso that has worked in the past burn it and see if it will work now.

make sure all the setting are right in imgburn and go by this guide it works.
http://www.robinhoodsplayground.com/for ... =110&t=117

[Sesshomaru]

Just to add... ImgBurn 2.0 and later supports reading the Layer Break from the dvd file. There is no longer any need to set the layer break manually in the program. That can in fact cause coasters. That is straight from Lightning UK himself. Simply drag and drop the dvd file into ImgBurn and it will read the layer break perfectly.

I was thinking, what model 360 drive do you have have, and what firmware is it flashed with? Check the iso in XDVDMulleter and post a screen capture please. There is a possibility it's a Xtreme/iXtreme iso compatibility issue.

Also the possibility the iso is just a bad is likely, especially if you didn't rip it yourself. Are you having trouble with any other backups?

[stevieboy2k]

well in the end it was the media everyting was fine for about 2 weeks then i got the dredded ROD gonna try the xclamp fix in a couple of days....Wish me luck

[parminder]

what i would do first is remove the stock clamp and clean the paste which is on the chip, then reapply a bit of arctic silver 5 which is a good thermal compound. then refix the clamp and see if it works, if not then do the x-clamp./