what firmware needed for update of Lite-On DG16D2S

[heyyouguys]

Well i haven't updated firmware for 6 months or so and i am at 1.6. (Been away for awhile due to a friend with prostate cancer and helping out with that) I was thinking it is time to update but when i look at the info on the ixtreme LT it states that it;

* Supports all Liteon Drives (74850, 83850V1, 83850V2, 93450)

But i do not see DG16D2S on the list and i do not want to mess up.

I have the original key saved if needed.

Been looking for an answer before posting but could not find one so i am asking, what firmware should i be using to update and if there is any tutorial to explain what steps to follow so i do not mess up.

any help or points in the right direction would be greatly appreciated!

[cainhunpi]

DG16D2S is the 74850.

hope this helps

[gazzer]

hi if its been six months since your last update then i think you will have the seven series liteon drive and if you have the original keys dummy bin etc then you are in good shape. if you use iprep to do your flashing we are still waiting for iprep 12 which we are told will be used to do all the liteon drives you can use iprep 10.7 to flash the seven series liteon but none of the others but if you use jungle flasher to do your flashing all series liteons can be flashed you first need to get your firmwares from the usual places go to the download section on this site for the latest J.F IF YOU DO HAVE THE SEVEN SERIES LITEON DRIVE WITH THE KEYS THE BEST WAY TO UPGRADE WOULD BE TO USE THE LATEST JF PUT YOUR DUMMY BIN IN THE SOURCE TAB THEN YOUR NEW LIGHT FIRMWARE IN TARGET THEN SPOOF TO TARGET AND SAVE. YOU CAN THEN USE IPREP 10.7 TO FLASH BUT THE FIRMWARE YOU HAVE JUST MADE WILL NEED CHANGING SO IT WILL BE CALLED L74CFW.BIN INSTEAD OF IX-LT-748.BIN MAKE TWO FOLDERS 1234567 AND ANOTHER FOLDER 12345 PUT THE NEW NAMED FIRMWARE IN FOLDER 12345 AND THEN PUT THAT FOLDER INTO 1234567 ONCE THATS DONE AND YOU HAVE MADE YOUR IPREP 10.7 PUT THIS FOLDER IN YOUR BACKUP FOLDER ON YOUR USB STICK THEN REBOOT INTO DOS WITH IPREP ON THE C. COMMAND TYPE L74 1234567 12345 W THEN HIT ENTER THEN JUST FOLLOW THE COMMANDS MAKE SURE CK3 IS CONNECTED ETC DONT NEED PROBE IF ITS STRAIGHT TO FLASH

[heyyouguys]

Cool, i do use jungle flasher and will let you know how it goes. yeah i didnt know that the DG16D2S is the 74850, .

yeah, i have the original keys. Heck, i even sent them to my gmail account so i would have an online backup of em, just in case.

Will do the flashing next week as it is my daughters d-day today and have to go back to work tomorrow.