liteon touch

The place for more technical questions about modding your Xbox 360!
Post Reply
staningrimsby
Bandit
Bandit
Posts: 130
Joined: Fri Feb 06, 2009 3:12 pm

liteon touch

Post by staningrimsby »

Hi guys does anybody have any information on the liteon touch firmware yet and if it works with the latest version of 'i-prep' ???
gazzer
Bandit
Bandit
Posts: 138
Joined: Sun Mar 22, 2009 7:14 pm
Location: MANCHESTER ENGLAND

Re: liteon touch

Post by gazzer »

original keys dummy bin etc then you are in good shape. if you use iprep to do your flashing we are still waiting for iprep 12 which we are told will be used to do all the liteon drives you can use iprep 10.7 to flash the seven series liteon but none of the others but if you use jungle flasher to do your flashing all series liteons can be flashed you first need to get your firmwares from the usual places go to the download section on this site for the latest J.F IF YOU DO HAVE THE SEVEN SERIES LITEON DRIVE WITH THE KEYS THE BEST WAY TO UPGRADE WOULD BE TO USE THE LATEST JF PUT YOUR DUMMY BIN IN THE SOURCE TAB THEN YOUR NEW LIGHT FIRMWARE IN TARGET THEN SPOOF TO TARGET AND SAVE. YOU CAN THEN USE IPREP 10.7 TO FLASH BUT THE FIRMWARE YOU HAVE JUST MADE WILL NEED CHANGING SO IT WILL BE CALLED L74CFW.BIN INSTEAD OF IX-LT-748.BIN MAKE TWO FOLDERS 1234567 AND ANOTHER FOLDER 12345 PUT THE NEW NAMED FIRMWARE IN FOLDER 12345 AND THEN PUT THAT FOLDER INTO 1234567 ONCE THATS DONE AND YOU HAVE MADE YOUR IPREP 10.7 PUT THIS FOLDER IN YOUR BACKUP FOLDER ON YOUR USB STICK THEN REBOOT INTO DOS WITH IPREP ON THE C. COMMAND TYPE L74 1234567 12345 W THEN HIT ENTER THEN JUST FOLLOW THE COMMANDS MAKE SURE CK3 IS CONNECTED ETC DONT NEED PROBE IF ITS STRAIGHT TO FLASHgazzer
Squire


Posts: 45
Joined: Mon Mar 23, 2009 12:14 am
Private message
staningrimsby
Bandit
Bandit
Posts: 130
Joined: Fri Feb 06, 2009 3:12 pm

Re: liteon touch

Post by staningrimsby »

Thanks for that gazz i will look into that, but what about iprep 11.6 thats what im using at the moment, i know that can flash 7xxx drives and the 8xxx drives.
gazzer
Bandit
Bandit
Posts: 138
Joined: Sun Mar 22, 2009 7:14 pm
Location: MANCHESTER ENGLAND

Re: liteon touch

Post by gazzer »

i think theres been issues with the 116 and L.T firmware. did my 7 series with 10.7 hope that helps you
User avatar
pink
Bandit
Bandit
Posts: 162
Joined: Tue Mar 25, 2008 11:53 am

Re: liteon touch

Post by pink »

staningrimsby-be careful, this method may cause a ban .
this is the question i raised with klutsh about spoofing a benq to a liteon and the response:
http://www.klutsh.com/index.php/topic,2 ... 24326acbcf" onclick="window.open(this.href);return false;
so, injecting a key from one lite to another may have the same results
the reason y the iprep 11.6 wont work, according to klutsh,
http://www.klutsh.com/index.php/topic,2 ... 24326acbcf" onclick="window.open(this.href);return false;
staningrimsby
Bandit
Bandit
Posts: 130
Joined: Fri Feb 06, 2009 3:12 pm

Re: liteon touch

Post by staningrimsby »

Thanks guys,

But no im not spoofing at all, at the moment my drive is a lite-on 74 runing ix1.6 with the activation disk, iwas going to upgrade it to 1.61 but then heard on the grapevine that touch was available just didn't know if there were any ix defs out that support it yet ???
staningrimsby
Bandit
Bandit
Posts: 130
Joined: Fri Feb 06, 2009 3:12 pm

Re: liteon touch

Post by staningrimsby »

Thanlks for the help gazzer your simple tutorial worked a treat, although i did use iprep 11.6 instead of 10.7. :D
gazzer
Bandit
Bandit
Posts: 138
Joined: Sun Mar 22, 2009 7:14 pm
Location: MANCHESTER ENGLAND

Re: liteon touch

Post by gazzer »

nice one glad all went well
Post Reply

Return to “360 DVD Drive Flashing”