Robin Hoods Playground

It's one hell of a mission getting in a Wii

I can't get the Triwing screws out (the ones that are set back into the case) no matter what I try

anyone got any tips??

lilrevuk

man its been a while.
i think i used two different sizes of screwdriver.
man if need be before you mess it up.

Might post it as it is (if that's ok with my man). I've got down to those last 2 screws, it's really difficult to see if you are undoing them or not

I only use two screw drivers. Ones a philips #0 and the other is a tri-wing that I bought from gamersection.ca, here is the link to the tri-wing that I bought http://www.gamersection.ca/product_info ... f0qqbrejb1

Dunno if that helps you any, but thats what I used to open mine up with.

http://www.robinhoodsplayground.com/for ... ed7&t=1117#
Tip: When removing the case screws, use different colored Sharpies to color code the screws AND the holes they came from. I usually remove the screw first, color the head and then color the screwhole it came from. There are four (or is it 5?) different screw types (head/length) combinations.

man
the last one i took all the way apart to put on a new case(it was mine)
was nuts i cant believe all the screws

There are alot of screws, different lengths and things, but I can only remember there being philips and tri-wing screws.

sadalius wrote:There are alot of screws, different lengths and things, but I can only remember there being philips and tri-wing screws.

yep your right as far as i remember

I've got the right screwdrivers, just can't see if I'm undoing them or not....

I've got all the others out, just those 2

I'll post a few pic's soon, you only need to remove
5 Phillips screws and 8 Tri Wing screws for the case.
Phillips:
2 Small black phillips either side of the front panel, 2 even smaller phillips on the black side panel, 1 that hold the battery.
Tri-Wing:
2 Black ones under the stickers on the front panel, 2 Silver under the rear rubber feet, 2 Silver Under the black side panel, 1 Silver under the battery compartment, 1 Silver under the small sticker on the side near the battery, the one at the bottom.

Then 4 Phillips that are holding the DVD drive down.

Take care when lifting the drive, watch out for the ribbon cable.

Heres the Pics
http://www.x-projects.org/page.php?5