How do u back up games with the 360elite w/ BenQ

Post by **KornFreak4500** » Thu Mar 13, 2008 1:20 pm

I just want to be able to rip games on my elite put a dvd in the drive and burn them off. (BenQ drive). Is this possible and if so how?

Post by **CoFree** » Thu Mar 13, 2008 1:23 pm

im not sure what you are wanting to do.
there are ways to backup a game
one of which is to use a benq drive but this can be tricky and need more than one flash to do.
the bast way is to get a sh-d162c dvd drive from ebay(not made anymore)
and dump the game to your computer then burn it to a DL disc.

there is no way to dump a 360 game i to the hard drive on the 360.

Post by **KornFreak4500** » Thu Mar 13, 2008 2:33 pm

What would be the least stressful way to make copies of xbox 360 games with the elite. (BenQ)

Post by **KornFreak4500** » Thu Mar 13, 2008 2:37 pm

Also this is my first time ever modding anything, so i will probably need ALOT of help and details if you could. Thanx

Post by **CoFree** » Thu Mar 13, 2008 2:45 pm

this is where you start.read this
http://www.robinhoodsplayground.com/for ... =110&t=662

after that you will have a better understanding.then watch thsi video.
http://www.robinhoodsplayground.com/for ... =110&t=277

Post by **KornFreak4500** » Mon Mar 17, 2008 4:44 pm

I have evrything i need, i just have a couple questions. What does USB Flash Drive mean? Also, and how do i know what SATA chipset i have. (my SATA is built in on my motherboard). besides this i am ready to flash my BenQ. thanks for the help.

Post by **KornFreak4500** » Mon Mar 17, 2008 5:22 pm

What does this mean " Turn on the PC and boot from the USB Flash Drive into DOS." sorry but i don't really know all these terms yet. plz help

also what does this mean " NTSF4DOS CD "

Post by **sadalius** » Mon Mar 17, 2008 5:51 pm

A USB flash drive is a memory stick that connects via USB.

To find out what sata chipset your computer has, look through the device manager, or run iprep and it should tell you.

An NTFS4DOS cd is a bootable CD that will give you a dos prompt, but still be able to read the NTFS file system of the computer. Not all computers have an NTFS file system, but the majority of newer computers do. The idea behind NTFS4DOS CD is to have the iprep files on the main hdd of your computer and use the CD to boot with to get a dos prompt so you can access your hdd where you put the iprep files and run them.

You may or may not have everything that you need. This depends on what chipset your computer has. Lots of people have problems with on board sata so don't get real frustrated if yours don't work, you would just need to order an add on sata card that has the VIA 6421 chipset.

Post by **KornFreak4500** » Mon Mar 17, 2008 6:03 pm

thanks. what would be easier to do the USB or CD?

Post by **sadalius** » Mon Mar 17, 2008 6:59 pm

One is about as good as the other really. Most people prefer to do the USB stick though because keeping up with a cd can be a little aggravating

Post by **KornFreak4500** » Mon Mar 17, 2008 9:04 pm

I'm not trying to be a bother but could you explain the steps on how to find out what SATA do i have on my motherboard.

Post by **CoFree** » Mon Mar 17, 2008 9:29 pm

man
sata is just a plug that will hook up to the newer dvd drives and HD.
your chipset is the kind of chip on your mother board.

SATA
Serial Advanced Technology Attachment (SATA, IPA: /ˈseɪtə/ or /ˈsætə/) is a computer bus primarily designed for transfer of data between a computer and storage devices (like hard disk drives or optical drives).
The main benefits are faster transfers, ability to remove or add devices while operating (hot swapping), thinner cables that let air cooling work more efficiently, and more reliable operation with tighter data integrity checks than the older Parallel ATA interface.

Your fine man

like i said in the chat just dont get in a hurry.
take your time and read,read and then read some more.

Post by **KornFreak4500** » Tue Mar 18, 2008 11:20 pm

Is there any special type of USB flash drive i need. Also what size memory should it have on it? thanks

Post by **pluto_00** » Wed Mar 19, 2008 6:10 am

I did my elite with benq
didn't use a Usb mem stick but the old floppy instead. I had troubles booting up form USB.

IF you know what motherboard you have post the exact name so maybe we can double check if your sata chipset is a good one. You can look it up to on the specs of your motherboard.

I had to order a sata VIA VT 6421 L thats a card with other sata chipset that does work fine for the benq !

Post by **CoFree** » Wed Mar 19, 2008 10:34 am

KornFreak4500 wrote:any special type of USB flash drive

most of them will work

i use a kingston usb flash 1GB

Robin Hoods Playground

How do u back up games with the 360elite w/ BenQ

How do u back up games with the 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ

Re: How do u Rip and Burn games only using your 360elite w/ BenQ