flashing benq with floppy

[westsyde]

Hey i need help to flash a benq using floppy way! I basically need know how to read and flash perfect thanks!

[parminder]

hi, best wy and easiest would be using iprep, it is same way as using a flash instead using a floppy.
here have a look at this tut:

viewtopic.php?f=110&t=277

basically where you need to choose what drive letter it is you just put the letter for the flooppy and set the boot in dos, to floppy first and just follow the video.
cheers

[CoFree]

yep
the video will help but you need to read this.
viewtopic.php?f=110&t=662

[trance]

westsyde, i flashed my benq with a floppy using iprep.
i used textbooks tut, just bear in mind a floppy takes time to dump/flash. also iprep took over 2 mins to prepare my floppy ( i wrongly thought iprep crashed) so you got to have patience.

[ncaaplayer4]

Trance is right, It is very slow. I flashed mine with a floppy.

[parminder]

yeh i hate floppys 2 slow and stops working really quick, glad it worked for you.

[westsyde]

will i read the guide using floppy never said anything about taking to long!! only reason i have to use floppy is because my computer does not boot from usb. When i tryed the ntfs4dos cd i got few errors! my only option is floppy! so doesnt it work eventhough it takes awhile?

[CoFree]

as long as your floppy and your drive is good it should be fine.
you need to remember that after the dump it will take a few min for firmtool to start and build your hacked firmware.
dont turn the computer off until you see the last thing in the video.
http://www.robinhoodsplayground.com/for ... =110&t=277

you will see in the video that firmtool starts fast after the dump.give the floppy some time to start firmtool.