Page 1 of 2

iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Fri Apr 08, 2011 9:39 pm
by CoFree
C4E iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504
>> C4Eva (in association with Team Jungle & Team Xecuter) released the iXtreme LT+ for LiteOn DG-16D4S 9504 drives:

World first backups for XBOX 360 Slim
- For Liteon Drive 9504

New protection measures for slim:
* Realtime checks of drive firmware and ram by dashboard - Rootkit technology used to pass several realtime check types. These checks on the drive are open ended so as to make replay of the answers impossible. Will pass any check on any part of the drive
* Hardware flash modification check - The 1335 chip performs a hardware check on powerup for modified firmware. Chip fooled into thinking firmware is stock
* Slim drive locked to read pressed game discs only - Enabled reading of DVD+R DL media for game discs

All features of current LT+ also included
- Optimised PFI code to accomodate AP25 SS data
- Defeats current AP25 protection
- Protects console from logging AP25 violation
- Full disc stealth used by default
- Waveless booting , disc images are assumed to be correct!
- Split-Vid used as default

If booting an AP25 title without AP25 SS game will not boot but will still be protected from logging AP25 violation on current dash 12625
If LT+ encounters an unknown AP25 challenge, game will not boot but console will still be protected from logging AP25 violation on current dash 12625

AP25 SS are region specific for region locked games

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Sat Apr 09, 2011 12:21 am
by trailz
Sweet! That made my day.

Hopefully the CFW for the other slim drive will be available soon, too.

Thanks for all your hard work, everyone involved.

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Fri Apr 15, 2011 1:10 pm
by EnVyMoNtOyA
is there going to be a "how to" video on this? and the new x360usb?

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Fri Apr 15, 2011 1:51 pm
by CoFree
ill do my vid as soon as i can
im not sure when ill get a x360usb

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Fri Apr 15, 2011 2:16 pm
by commando_lee
CoFree wrote:ill do my vid as soon as i can
im not sure when ill get a x360usb
let me know if you have problems getting one over your end and ill see if i can get one ups to you

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Fri Apr 15, 2011 2:33 pm
by CoFree
i can get one
its just a matter of when i do it ;)

ive got to have a drive to flash first

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Fri Apr 15, 2011 2:38 pm
by yamackbuddy4
x360 usbpro is not needed for this drive. However if one has had problems flashing older liteons (freezing) then it may be a good idea to have. The usbpro is an excellent tool to have. Mine works flawlessly. Havent done the new liteon as I dont have one handy but all others have flashed without a hiccup. We have a tutorial here in the user tutorial section. For those that want to take a shot at it.

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Fri Apr 15, 2011 2:45 pm
by CoFree
yea
im sure the first guide i do will be just flashing by hooking it up to my pc
im all about cheap most of the time
but
i will get one of the new tools (not sure which one)
ive been waiting to see if one fell in my lap but no luck so far :D
and do a vid with it also
there are a lot of people that want/need easy.

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Sat Apr 16, 2011 11:09 am
by EnVyMoNtOyA
great to hear... thanks guys. so this drive doesn't need to be cut and soldered? i can do it with my VIA sata card like the old ones?

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Sun Apr 17, 2011 6:21 am
by louisM92
yamackbuddy4 wrote:x360 usbpro is not needed for this drive.
can anyone confirm this? ive had a few people asking me to flash their slim console but had to turn them away because i wasnt sure if i needed it or not, someone let me know ASAP, thanks guys!

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Sun Apr 17, 2011 10:37 am
by EnVyMoNtOyA
confirmed! just did it my self in under a hour. i had a hard time getting the unsigned drivers to work on my 64bit windows 7 PC but once i got past that to the actual flashing i'd say its the easiest drive i've ever done. no opening half way or powering down and stuff like that. a few button clicks and your all done. i used a VIA Sata card and a CK3 pro to hook up my drive. give it a go.. super easy!

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Sun Apr 17, 2011 1:24 pm
by louisM92
thanks mate! gunna be doing one of these hopefully today, cant wait to get into one of them, its gunna be my first time opening a slim never mind flashing one, it should be fun! :D

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Sun Apr 17, 2011 1:26 pm
by louisM92
ill also make a video tutorial for you guys to watch! :)

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Sun Apr 17, 2011 3:59 pm
by EnVyMoNtOyA
cool! one quick word of advise though.. when opening the slim i used some how to videos on YouTube and theres was one out of the four i watched that was right on one step which was on how to get the metal lining out on both ends. after you take out the grills on both ends your left with some black plastic pieces under the grill.. don't rip those off because they are attached to the metal lining on both ends.. the guys online were ripping them out and causing them to break not know they were attached to the metal lining. just a heads up so you don't break it. good luck.

Re: iXtreme Slim LT+ Firmware for LiteOn DG-16D4S 9504

Posted: Sun Apr 17, 2011 4:42 pm
by louisM92
thanks buddy, so after the grills are removed get straight onto the metal lining, got ya! ;) i might have the xbox to do tomorrow now, didnt see the bloke with it all day so i couldnt do it, looking forward to it thou! :)