0800 vs 1.0 Burner Max FW

The place for more technical questions about modding your Xbox 360!
Post Reply
User avatar
brew4u
Peasant
Peasant
Posts: 12
Joined: Thu Aug 26, 2010 1:55 am

0800 vs 1.0 Burner Max FW

Post by brew4u »

Could I get a little clarification on the difference between using the BenQ 0800 VAD6038 v3.0/Lite-On 0800 DG-16D2S v3.0 vs. the iXtreme Burner Max 1.0 FW? I understand that when using the Max it's using the specific LiteOn drive in a PC as other tuts have explained nicely (thanks CoFree), I also understand that this is the "preferred" method as of now. Personally however I have a few options for v3.0 and would rather not have to buy or more importantly wait (30 seconds....but I want it now H.S.) for one to ship.

More succinctly, are there down sides to using the 3.0 fw? Is there a tut for setting up and using the 3.0 for either drive (I'll most likely be using a DG-16D2S) and if so could you lead my sorry ass to it please, I seem to be needing my hand held on this one? I'm super exhausted so if I looked past obvious information and am creating a redundancy I pre apologize.

Cheers
Thank you for being smarter than me.
User avatar
moonknight
Possible Ally of Robinhood
Possible Ally of Robinhood
Posts: 323
Joined: Mon Mar 31, 2008 5:12 pm

Re: 0800 vs 1.0 Burner Max FW

Post by moonknight »

In a nutshell...

0800 v3.0 for ripping
LT max for burning
LT 2.0 for playing


The 0800 firmware is what you flash to a BENQ xbox 360 drive for use in your computer to copy xbox 360 games.

The LT max firmware is for use on a Liteon dvd burner (iHas version SATA), which allows you to burn your backups made with the 0800 firmware.

The LT 2.0 firmware is what you flash to a BENQ xbox 360 drive to play copies of your backup xbox 360 games.
User avatar
brew4u
Peasant
Peasant
Posts: 12
Joined: Thu Aug 26, 2010 1:55 am

Re: 0800 vs 1.0 Burner Max FW

Post by brew4u »

Ah of course.....I had a feeling I was missing the boat here on something. COuldn't figure how the hell you'd hook the drive straight to the PC to rip it. That would be cool though if you could use a ck3 or something to rip on a 0800 connected to a PC. Got it now, guess I'd better get on the bandwagon and get me one of those. I have an older lightscribe in the closet, guess I ought to give er' a look.

Cheers friend.
Thank you for being smarter than me.
User avatar
sas67
Possible Ally of Robinhood
Possible Ally of Robinhood
Posts: 319
Joined: Wed Feb 18, 2009 2:29 pm
Location: sunny scunny,uk

Re: 0800 vs 1.0 Burner Max FW

Post by sas67 »

benq or liteon with 0800v3 fw is to be hooked upto pc using ck3 and either,x360usbpro or sata cable.
the liteon drive to be flashed with LT burner max must be an iHAS version B
c4eva listed 6 drives and can be bought for £20 approx

http://robinhoodsplayground.com/forum/v ... 61&t=16246

there is the full list
flash all phat's and slim drives upto 1175fw.awaiting delivery of cr3lite

Image
Post Reply

Return to “360 DVD Drive Flashing”