Lite-on "open tray status" after flash but, works fine

The place for more technical questions about modding your Xbox 360!
Post Reply
User avatar
tron999
Peasant
Peasant
Posts: 19
Joined: Wed Apr 09, 2008 1:03 pm

Lite-on "open tray status" after flash but, works fine

Post by tron999 »

I used a 360Xtractor Pro v1.2 and spear everything flashed fine with jungle flasher but, I've done 3 so, far all 3 are getting open tray status on the dashboard screen but, everything backups play fine and works normal but, I tried different methods like flashing with the drive close and open and still the same results... I was thinking maybe about its because I eject the drive open turn off power and then push 1\2 close..... I was thinking of trying hit eject to close and then turning off power to drive and reflashing the drive again if its worth trying or also was wondering if anybody ran into this problem or have any suggestions on problem. just some info in case somebody have suggestions or advice I'm really good with soldering and I've modded a lot of different types of electronics so,I'm not new to modding scene any advice is appreciated,thank you! robinhoods playground kicks@ss! you guys rock! :D :D :D
Last edited by tron999 on Wed Mar 04, 2009 12:04 am, edited 1 time in total.
Image
Image
Image
iamwatt
Ally of Robinhood
Ally of Robinhood
Posts: 875
Joined: Wed Jan 21, 2009 5:50 pm
Location: new york

Re: Lite-on "open tray status" after flash but, works fine

Post by iamwatt »

i had to read what you wrote a few time to understand completely. sounds like you flashed the drives and they work but eynow and then you get an open try prompt. if thats the case i don't see any reason to be alarmed, sometimes the drive struggles to read the disk, might be the media you're using. i get that eynow and then as well. is that the case?
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: Lite-on "open tray status" after flash but, works fine

Post by CoFree »

glad you got it.

i like using iprep to flash my lite-on drives
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
User avatar
tron999
Peasant
Peasant
Posts: 19
Joined: Wed Apr 09, 2008 1:03 pm

Re: Lite-on "open tray status" after flash but, works fine

Post by tron999 »

CoFree wrote:glad you got it.

i like using iprep to flash my lite-on drives
Thanks for your time guys but, I should had more details its says open tray with no disc inside the drive it says open tray status no media inside the tray and the tray physically closed and I use only verbatims and burn at 2.4 with clonecd but, when I put in a back up reads and plays just fine .
Image
Image
Image
iamwatt
Ally of Robinhood
Ally of Robinhood
Posts: 875
Joined: Wed Jan 21, 2009 5:50 pm
Location: new york

Re: Lite-on "open tray status" after flash but, works fine

Post by iamwatt »

still not making any sense, although it's suppose to say open tray when theres no game in the tray, thats the option its giving you to put a game in. . .

are you saying that it says open tray while theres a game in the drive?
User avatar
tron999
Peasant
Peasant
Posts: 19
Joined: Wed Apr 09, 2008 1:03 pm

Re: Lite-on "open tray status" after flash but, works fine

Post by tron999 »

iamwatt wrote:still not making any sense, although it's suppose to say open tray when theres no game in the tray, thats the option its giving you to put a game in. . .

are you saying that it says open tray while theres a game in the drive?
I will try to post a video link video tomorrow, thanks for patience, I'm at work tonight . thanks guys! :)
Image
Image
Image
User avatar
tron999
Peasant
Peasant
Posts: 19
Joined: Wed Apr 09, 2008 1:03 pm

Re: Lite-on "open tray status" after flash but, works fine

Post by tron999 »

tron999 wrote:
iamwatt wrote:still not making any sense, although it's suppose to say open tray when theres no game in the tray, thats the option its giving you to put a game in. . .

are you saying that it says open tray while theres a game in the drive?
I will try to post a video link video tomorrow, thanks for patience, I'm at work tonight . thanks guys! :)

Nevermind, forget everything I said, I don't now where's my head at jeeeezz ! I need to sleep more :oops: I'm a freaking burn out! thanks for all the help ! i don't know what I'm thinking anymore, thanks for all your time guys much appreciated thanks! iamwatt and thanks cofree! thanks guys. :lol:
Image
Image
Image
iamwatt
Ally of Robinhood
Ally of Robinhood
Posts: 875
Joined: Wed Jan 21, 2009 5:50 pm
Location: new york

Re: Lite-on "open tray status" after flash but, works fine

Post by iamwatt »

lol! i take it you figured out what it was, i'd like to know too. . .
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: Lite-on "open tray status" after flash but, works fine

Post by CoFree »

yea
well that is not good enough man :?

what in the world were you doing/not doing :D

It could help others.
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
User avatar
tron999
Peasant
Peasant
Posts: 19
Joined: Wed Apr 09, 2008 1:03 pm

Re: Lite-on "open tray status" after flash but, works fine

Post by tron999 »

iamwatt wrote:lol! i take it you figured out what it was, i'd like to know too. . .
Don't buy that step on Sh!t from reggie on the corner of 12th & Washingtonian LOL... thats what happens when your at a busy F1re station (sleep deprived night after night ) and you stay up till 6:30 in the morning(the sun was up) screwing around with the modding stuff and programmers .. I'm think I went into a state of dementia ... sometime some days seem like a dream I'm so freaking tired for some freaking weird reason i thought it was suppose to say "closed tray" LMAO... man I need some sleep, Basically everything flashed fine :oops: . I'm going change my name to the forums clueless mumbler...thanks guysss.. haahha ...... also cofree I didn't see anything for site donation !! I appreciate all the help !
Image
Image
Image
sadalius
Robinhood
Robinhood
Posts: 4039
Joined: Wed Nov 07, 2007 6:06 pm

Re: Lite-on "open tray status" after flash but, works fine

Post by sadalius »

As a former volunteer firefighter, I know what sleep deprivation means and I have a lot of respect for those that choose that as a profession. Glad you got it figured out man, and stuff like that happens to all of us. As for donations, I don't think CoFree is taking any. I know I don't and thats because the reward comes from seeing those posts that say, "I got it done!!" That's the thing I like to see most.
Sadalius

No questions by PM please
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: Lite-on "open tray status" after flash but, works fine

Post by CoFree »

its all good
thanks man
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
Post Reply

Return to “360 DVD Drive Flashing”