Page 1 of 1

Lite-on "open tray status" after flash but, works fine

Posted: Tue Mar 03, 2009 3:27 am
by tron999
I used a 360Xtractor Pro v1.2 and spear everything flashed fine with jungle flasher but, I've done 3 so, far all 3 are getting open tray status on the dashboard screen but, everything backups play fine and works normal but, I tried different methods like flashing with the drive close and open and still the same results... I was thinking maybe about its because I eject the drive open turn off power and then push 1\2 close..... I was thinking of trying hit eject to close and then turning off power to drive and reflashing the drive again if its worth trying or also was wondering if anybody ran into this problem or have any suggestions on problem. just some info in case somebody have suggestions or advice I'm really good with soldering and I've modded a lot of different types of electronics so,I'm not new to modding scene any advice is appreciated,thank you! robinhoods playground kicks@ss! you guys rock! :D :D :D

Re: Lite-on "open tray status" after flash but, works fine

Posted: Tue Mar 03, 2009 11:18 am
by iamwatt
i had to read what you wrote a few time to understand completely. sounds like you flashed the drives and they work but eynow and then you get an open try prompt. if thats the case i don't see any reason to be alarmed, sometimes the drive struggles to read the disk, might be the media you're using. i get that eynow and then as well. is that the case?

Re: Lite-on "open tray status" after flash but, works fine

Posted: Tue Mar 03, 2009 11:46 am
by CoFree
glad you got it.

i like using iprep to flash my lite-on drives

Re: Lite-on "open tray status" after flash but, works fine

Posted: Wed Mar 04, 2009 12:03 am
by tron999
CoFree wrote:glad you got it.

i like using iprep to flash my lite-on drives
Thanks for your time guys but, I should had more details its says open tray with no disc inside the drive it says open tray status no media inside the tray and the tray physically closed and I use only verbatims and burn at 2.4 with clonecd but, when I put in a back up reads and plays just fine .

Re: Lite-on "open tray status" after flash but, works fine

Posted: Wed Mar 04, 2009 12:44 am
by iamwatt
still not making any sense, although it's suppose to say open tray when theres no game in the tray, thats the option its giving you to put a game in. . .

are you saying that it says open tray while theres a game in the drive?

Re: Lite-on "open tray status" after flash but, works fine

Posted: Wed Mar 04, 2009 1:49 am
by tron999
iamwatt wrote:still not making any sense, although it's suppose to say open tray when theres no game in the tray, thats the option its giving you to put a game in. . .

are you saying that it says open tray while theres a game in the drive?
I will try to post a video link video tomorrow, thanks for patience, I'm at work tonight . thanks guys! :)

Re: Lite-on "open tray status" after flash but, works fine

Posted: Wed Mar 04, 2009 2:36 am
by tron999
tron999 wrote:
iamwatt wrote:still not making any sense, although it's suppose to say open tray when theres no game in the tray, thats the option its giving you to put a game in. . .

are you saying that it says open tray while theres a game in the drive?
I will try to post a video link video tomorrow, thanks for patience, I'm at work tonight . thanks guys! :)

Nevermind, forget everything I said, I don't now where's my head at jeeeezz ! I need to sleep more :oops: I'm a freaking burn out! thanks for all the help ! i don't know what I'm thinking anymore, thanks for all your time guys much appreciated thanks! iamwatt and thanks cofree! thanks guys. :lol:

Re: Lite-on "open tray status" after flash but, works fine

Posted: Wed Mar 04, 2009 9:59 am
by iamwatt
lol! i take it you figured out what it was, i'd like to know too. . .

Re: Lite-on "open tray status" after flash but, works fine

Posted: Wed Mar 04, 2009 10:55 am
by CoFree
yea
well that is not good enough man :?

what in the world were you doing/not doing :D

It could help others.

Re: Lite-on "open tray status" after flash but, works fine

Posted: Thu Mar 05, 2009 4:30 am
by tron999
iamwatt wrote:lol! i take it you figured out what it was, i'd like to know too. . .
Don't buy that step on Sh!t from reggie on the corner of 12th & Washingtonian LOL... thats what happens when your at a busy F1re station (sleep deprived night after night ) and you stay up till 6:30 in the morning(the sun was up) screwing around with the modding stuff and programmers .. I'm think I went into a state of dementia ... sometime some days seem like a dream I'm so freaking tired for some freaking weird reason i thought it was suppose to say "closed tray" LMAO... man I need some sleep, Basically everything flashed fine :oops: . I'm going change my name to the forums clueless mumbler...thanks guysss.. haahha ...... also cofree I didn't see anything for site donation !! I appreciate all the help !

Re: Lite-on "open tray status" after flash but, works fine

Posted: Thu Mar 05, 2009 11:57 am
by sadalius
As a former volunteer firefighter, I know what sleep deprivation means and I have a lot of respect for those that choose that as a profession. Glad you got it figured out man, and stuff like that happens to all of us. As for donations, I don't think CoFree is taking any. I know I don't and thats because the reward comes from seeing those posts that say, "I got it done!!" That's the thing I like to see most.

Re: Lite-on "open tray status" after flash but, works fine

Posted: Thu Mar 05, 2009 12:07 pm
by CoFree
its all good
thanks man