Flashing a Lite-on

[Uwantmore]

If you have a Lite-on drive can you flash it with a ck3 or xtractor and use that lite-on drive?

Or must I replace the lite-on drive and use a Spoof bin from the Lite-on on a Benq Drive?

Reason I ask this is reading the directions off Xtrators site it says that I have to spoof the drive etc but these could be a older set directions.

[CoFree]

you can flash the lite-on dvd drive

here is a video of me doing just that.
viewtopic.php?f=195&t=3672" onclick="window.open(this.href);return false;
that is using jungle flash

[Uwantmore]

Thanks Cofree you been a great help, but I'm haveing a issue with jungle flasher no matter what version I try to open it gives me a message the application failed to initilaze properly (oxc0000135)click oh to terminate.

I had it working with the ck3 when I had that chip.But that chip was faulty and they exchanged it for the xtreme, and from the ck3 locking my pc so many times. I had to format my pc the os kept looping from all the cold starts.

I can use the 360 xtractor reader and use seriel to get the bin atleast it seems to search and locate the drive test port comes back good and i see the drive then i get the key read fine .I see a key in key retrieved but soon as I choose Prepare spoofed firmware it loads the last read files then i try to load the base fw I get a error message at that point that says cannot determine Fw type.

I don't no what the hell I could be doing wrong but I don't need another Dvd player "lol"

I'm on Xp, I have the correct 6421 Sata card, I have a Xtreme chip with the probe,I have a seriel cable because usb sometimes locks the pc up and seriel has never done that,Lite-on drive ,I installed the usb drivers,Cdm 2.04.16 drivers,Portio32 1.4 drivers. I hope that's enough info.

[CoFree]

have you done this.
viewtopic.php?f=63&t=4351" onclick="window.open(this.href);return false;

[Uwantmore]

I tryed that .my problem with jungle flasher will not even load up on my pc ,I formatted it several times from a clean install it wont even load up none off the versions load on this pc I have no clue why.I'm gone to try a differant pc with vista tommorw tonight i need a drink

[dalecheesy]

Make sure you have .dotnet 2 or above installed and are running jungleflasher on an administrator account. It takes a bit to load up too so give it a minute.

[Uwantmore]

Ya my jungle flashers wont load up at all I get a instant error message telling me application failed to initilaze properly (oxc0000135)click oh to terminate.i'll try dotnet2 and let you no.Thanks

[Uwantmore]

I installed Framework 2.0 and I'm now up and running.this is why posting in a forum is the shit you guys are great need I say more.

Thanks again!
now on to my next problem getting the usb to work soon as I plug that in my pc locks up it works at times when it want's to.Is there a process that I should be d0ing like pluging in the usb to pc then turn power on chip on etc." If not I can use the seriel cable but that also at times locks my pc up when turning the xtractor on."