Page 1 of 1

any programs or tools need to know before i flash ?

Posted: Wed Mar 18, 2009 10:14 am
by yousif666
Hi

i will flash my drive

i have a benq Drive and i want to know if there are any new programs or tools that i need to use because i dont remember any thing for along time

now i am back in flashing

so just want to know

BTW i have a xbox360 NTSC with HDMI built in just wanted to tell mybe there are defference in the console and using the programs

Thank you

Re: any programs or tools need to know before i flash ?

Posted: Wed Mar 18, 2009 11:09 am
by iamwatt
i would say get iPrep 8.8 and the new 1.51 firmware, you can find those at xbins, a ck3 lite or pro and if you don't have one already get a via 6421 card. you'll also need a flash drive.

connectivity kits
ck3 lite
ck3 pro

the card
via 6421

follow this and you should be good to go. . .
benq tutorial

Re: any programs or tools need to know before i flash ?

Posted: Wed Mar 18, 2009 12:07 pm
by yousif666
thanks :)

i bought my xbox360 modded so i have to dump the key first right cus i dont have the original firmware

i want to know one more thing

i have the Sata card already

but i dont have the opening tool kit for xbox360 cus you know its kind of hard to open

where can i buy the opening tool kit

and thanks in advance

Re: any programs or tools need to know before i flash ?

Posted: Wed Mar 18, 2009 12:17 pm
by iamwatt
yea, you should follow the whole flashing process, and dumping is apart of that. once you get a good dump, back it up and then proceed to flash. i use a torx 9 and a small flat head screwdriver to get the 360 open, i wasn't paying for a toolkit. . . but you can find it on ebay if need be.

Re: any programs or tools need to know before i flash ?

Posted: Wed Mar 18, 2009 10:10 pm
by ohnoacucumber
Hey, look around the site coffee has a nice tut for iprep 8.8 easy to follow and I believe there is a topic stickied that has what you need an they are hyperlinked to the dl sites. Happy moddding. :mrgreen:


-cucumber :shock:

Re: any programs or tools need to know before i flash ?

Posted: Sat Mar 21, 2009 6:11 am
by yousif666
iamwatt wrote:i would say get iPrep 8.8 and the new 1.51 firmware, you can find those at xbins, a ck3 lite or pro and if you don't have one already get a via 6421 card. you'll also need a flash drive.

connectivity kits
ck3 lite
ck3 pro

the card
via 6421

follow this and you should be good to go. . .
benq tutorial
Hi

i have problems with modchip.ca

can you please give me another website that is trusted to order from ? (modchip.ca is trusted but i have issues with them)


Thank you

Re: any programs or tools need to know before i flash ?

Posted: Sat Mar 21, 2009 8:49 am
by iamwatt
try here, to the left they have a list of where to buy sites. . .

http://team-xecuter.com/ck3/

what was ya problem with modchips?

Re: any programs or tools need to know before i flash ?

Posted: Sat Mar 21, 2009 10:00 am
by yousif666
they said that the billing address is not the same as the shipping address

i dont know what is wrong with them

i have a US mailbox thats why i put it

anyway i ordered from other site and its ok now

Thank you