any programs or tools need to know before i flash ?

The place for more technical questions about modding your Xbox 360!
Post Reply
yousif666
Bandit
Bandit
Posts: 101
Joined: Fri Nov 30, 2007 10:05 am

any programs or tools need to know before i flash ?

Post by yousif666 »

Hi

i will flash my drive

i have a benq Drive and i want to know if there are any new programs or tools that i need to use because i dont remember any thing for along time

now i am back in flashing

so just want to know

BTW i have a xbox360 NTSC with HDMI built in just wanted to tell mybe there are defference in the console and using the programs

Thank you
iamwatt
Ally of Robinhood
Ally of Robinhood
Posts: 875
Joined: Wed Jan 21, 2009 5:50 pm
Location: new york

Re: any programs or tools need to know before i flash ?

Post by iamwatt »

i would say get iPrep 8.8 and the new 1.51 firmware, you can find those at xbins, a ck3 lite or pro and if you don't have one already get a via 6421 card. you'll also need a flash drive.

connectivity kits
ck3 lite
ck3 pro

the card
via 6421

follow this and you should be good to go. . .
benq tutorial
yousif666
Bandit
Bandit
Posts: 101
Joined: Fri Nov 30, 2007 10:05 am

Re: any programs or tools need to know before i flash ?

Post by yousif666 »

thanks :)

i bought my xbox360 modded so i have to dump the key first right cus i dont have the original firmware

i want to know one more thing

i have the Sata card already

but i dont have the opening tool kit for xbox360 cus you know its kind of hard to open

where can i buy the opening tool kit

and thanks in advance
iamwatt
Ally of Robinhood
Ally of Robinhood
Posts: 875
Joined: Wed Jan 21, 2009 5:50 pm
Location: new york

Re: any programs or tools need to know before i flash ?

Post by iamwatt »

yea, you should follow the whole flashing process, and dumping is apart of that. once you get a good dump, back it up and then proceed to flash. i use a torx 9 and a small flat head screwdriver to get the 360 open, i wasn't paying for a toolkit. . . but you can find it on ebay if need be.
User avatar
ohnoacucumber
Bandit
Bandit
Posts: 120
Joined: Mon Mar 16, 2009 9:29 pm
Location: Ohio?

Re: any programs or tools need to know before i flash ?

Post by ohnoacucumber »

Hey, look around the site coffee has a nice tut for iprep 8.8 easy to follow and I believe there is a topic stickied that has what you need an they are hyperlinked to the dl sites. Happy moddding. :mrgreen:


-cucumber :shock:
Image
yousif666
Bandit
Bandit
Posts: 101
Joined: Fri Nov 30, 2007 10:05 am

Re: any programs or tools need to know before i flash ?

Post by yousif666 »

iamwatt wrote:i would say get iPrep 8.8 and the new 1.51 firmware, you can find those at xbins, a ck3 lite or pro and if you don't have one already get a via 6421 card. you'll also need a flash drive.

connectivity kits
ck3 lite
ck3 pro

the card
via 6421

follow this and you should be good to go. . .
benq tutorial
Hi

i have problems with modchip.ca

can you please give me another website that is trusted to order from ? (modchip.ca is trusted but i have issues with them)


Thank you
iamwatt
Ally of Robinhood
Ally of Robinhood
Posts: 875
Joined: Wed Jan 21, 2009 5:50 pm
Location: new york

Re: any programs or tools need to know before i flash ?

Post by iamwatt »

try here, to the left they have a list of where to buy sites. . .

http://team-xecuter.com/ck3/

what was ya problem with modchips?
yousif666
Bandit
Bandit
Posts: 101
Joined: Fri Nov 30, 2007 10:05 am

Re: any programs or tools need to know before i flash ?

Post by yousif666 »

they said that the billing address is not the same as the shipping address

i dont know what is wrong with them

i have a US mailbox thats why i put it

anyway i ordered from other site and its ok now

Thank you
Post Reply

Return to “360 DVD Drive Flashing”