Hello,
How to you verify if the key you extracted from a liteon (using ck3 and probe) is valid?
Thank you
Verify liteon key
-
HaGGardSmurf
- Ally of Robinhood
- Posts: 4088
- Joined: Tue Feb 03, 2009 9:46 am
- Location: Alberta, Canada
Re: Verify liteon key
You can download and use FW toolbox 360 from xbins. Also download any OFW from xbins.
Open toolbox, load the OFW you downloaded. Click the [...] button beside the key part (it will probably say 000000000000000) then open your key.bin and you should see your key.
Open toolbox, load the OFW you downloaded. Click the [...] button beside the key part (it will probably say 000000000000000) then open your key.bin and you should see your key.
Re: Verify liteon key
There's no OFW for the lite on...
I think you could check it with FWToolbox once you have creadted your hacked firmware, but I would say go with Jungle Flasher to check your key. The best way to validate it, is it to dump it again and check the key's against each other....
Load your dummy as source, and you'll be able to see the key within the info for the firmware.
I think you could check it with FWToolbox once you have creadted your hacked firmware, but I would say go with Jungle Flasher to check your key. The best way to validate it, is it to dump it again and check the key's against each other....
Load your dummy as source, and you'll be able to see the key within the info for the firmware.
And if at first you don't succeed..? Order the damn card!
http://tekgems.com/Products/la-pci22-vt6421a.htmMirc is a place to chat, post up on the site for help!!!
Re: Verify liteon key
Thanks guys...i will do this on the next liteon drive i flash (no point doing it for the flash i did 
) flashing just becomes addicting i think
) flashing just becomes addicting i think