[Lite-On Drive And CK3]

[jshakes]

Hi I Have one Question... Do you I HAVE to have a 'CK3' To Flash a Lite-On Drive??????

Because I have flash a Benq,Samsung and hitachi Drives without a 'CK3'. To flash these drives, I Hooked up each drive via my sata card and thats all it needed for windows to detect my drives which allowed me to flash them. So if i soldered the R707 Could i still Flash the drive with my method????

I appreciate the help thank you.

[Backslash]

yes u have to have a ck3 or maximus extractor,

some info travels across the USB or rs232 cable and goes through sata also.

[jshakes]

ok thanks for the help

[jshakes]

is there a good site i could purchase one from??

[dalecheesy]

Theres a retailler review here if it helps you: viewtopic.php?f=184&t=3091" onclick="window.open(this.href);return false;

[jshakes]

if i have a ck2 can i still use the com port with it or do i just have to upgrade to ck3?

[CoFree]

the ck2 does not have a com port rs232 hook up
or
a usb hookup

so yes you have to get a ck3

[jshakes]

can i ask..........what type of rs232 cable do i need? (9-pins etc). And if i dont have the port on my pc would a Usb to Rs232 work?

[CoFree]

rs232 male/female (no a null cable)

no a usb to 9pin will not work.
no usb drives in dos.

[jshakes]

Thanks for the help, just had to be sure. My comp actually has that com port on the back

how much could i purchase the com adapter for and where from?

[xxTheKingxx]

I purchuse a com port pci card with a 9pin as well as the ck3 and probe do you guys think im good to go or am I missing acouple other things? And by the way keep up the phenomenal work cofree appreciate the help i've got from you so far. I've aced the benq flashing but now im trying to tinker with the lite on.

[dalecheesy]

If your pc already has a com port (which you said it has? )then you don't need to buy another card. You just need an r232 male to female serial extension (and the ck3 and probe) and you're good to go.

[CoFree]

I purchuse a com port pci card with a 9pin as well as the ck3 and probe do you guys think im good to go or am I missing acouple other things? And by the way keep up the phenomenal work cofree appreciate the help i've got from you so far. I've aced the benq flashing but now im trying to tinker with the lite on.

man
you are hi-jacking someones thread
its kind of rude man
you should have just started your own thread.

ive not messed with a pci 9 pin card
i think sadalius was testing that out some.
no sure where he is with that.

[jshakes]

These ck3 comes with a usb to usb rs232 connection does it work in iprep?.....if so isit still com1 or does it become com2?

[iamwatt]

the lite comes with a serial cable and the pro come with usb. usb will not work with iPrep. you'd have to use that with junglflasher. . .