Power Help

[Noobster]

Ok so I tried to find out my secondary error code by pressing the eject button 4 times while hitting the sync button and two lights flashed 6 times and it powered down now when I hit the power button to turn it back on it comes on for like half a second and then it turns itself off. Anyone know what I should do?

[CoFree]

if you have not
try a different power supply

[Noobster]

Yea I've tried that now still nothing I have lcds connected and I see them flash but still no power

[sas67]

does the power brick show green light?do you have a spare rf board to try?

[Noobster]

The light is green and I have no clue what a rf board is but my other xbox works fine with both cords

[technoe]

The RF board is the PCB (Printed Circuit Board) that is home to the five LED's on the front of your 360. It's also the board that's responsible for connection your controllers to your 360. I you really want to test it you'll have to pull a known good RF board and insert into the suspected bad 360.

[Noobster]

KK got it will try that next

[Noobster]

ok so nothing happened when I changed the pcb so I took it all the way apart cleaned everything to see mabye if when I did the xclamp fix I left a splatter or something. Now after I put it back together my power light stays green but I can hear the power and the fan turning off and on repeatedly. I can see the light on the power brick flash green and yellow over and over.
Any thoughts?

[Noobster]

please help

[technoe]

I say drop it to M$. It sounds like a dead board man. Sorry.