still having trouble with liteon

[ray]

still having problems guys,iprep wont pick up my liteon drive at all im using a via card its just picking up my computer hard drive and not the liteon if i put in a flash pen in the usb port it will pick that up,im using a rsr232 cable plus the contectivity kit,i installed the via drivers etc any ideas,also tryed jungle flasher renamed the drivers and disabled via drivers etc and installed io32,when opening jungle flasher im getting an error code then when it opens its picking up the drive ok,but when i insert prob and hit get key it locks up the computer,i would prefer to use iprep but it cannot see my xbox drive and its the only sata item connected,any ideas guys,thanks

[dalecheesy]

Are you using the internal port on your via card? The number 1 in this image

[ray]

hi,yes using port as in picture,im still having know luck

[commando_lee]

still having problems guys,iprep wont pick up my liteon drive at all im using a via card its just picking up my computer hard drive and not the liteon if i put in a flash pen in the usb port it will pick that up,im using a rsr232 cable plus the contectivity kit,i installed the via drivers etc any ideas,also tryed jungle flasher renamed the drivers and disabled via drivers etc and installed io32,when opening jungle flasher im getting an error code then when it opens its picking up the drive ok,but when i insert prob and hit get key it locks up the computer,i would prefer to use iprep but it cannot see my xbox drive and its the only sata item connected,any ideas guys,thanks

when you was setting i prep up did you select the correct sata controller ie your 6421 card or is it looking for the on board sata ports. that mite be the reason it wont find it? the attached picture shows you which sata controller to have

You wont need all the firmware files loaded in i just have it like that saves keep changing usb drive.

[ray]

hi,yes as your picture shows but in the drop down menu its showing target device, and the only drive its showing is my hard drive and it says fixed beside it like yours with know liteon drive showing,any ideas?thanks

[commando_lee]

hi,yes as your picture shows but in the drop down menu its showing target device, and the only drive its showing is my hard drive and it says fixed beside it like yours with know liteon drive showing,any ideas?thanks

the target device wont show you lite-on drive. change that to your usb drive. you should not have your 360 connected up yet any way. Only connect your drive when you get to the c:\ prompt in iprep. obviously connect your ck3 kit up and leave it turned off and leave the sata cable out.

Follow this step by step do exactly what it shows it will work.

viewtopic.php?f=195&t=5130" onclick="window.open(this.href);return false;

The RESPECT goes to cofree for making it

good luck lets us know how u get on

need any more help just shout ill be around for a few hours on this forum

[ray]

hi guys got a bit further now im getting a stack overflow error message after entering serial etc and putting probe in for key,i set bios to default with same result and i havent got a floppy drive any ideas,plus when i created my bootable usb drive i got an error message, then it made it, any ideas on this,sorry for the hassle guys

[rkd2398]

Have you tried Jungle Flasher, with an serial cable? I have found that it was super easy to flash the Lite-on this way.

If you haven't, check this out: viewtopic.php?f=195&t=3357" onclick="window.open(this.href);return false;

Sadalius did a great job with this video.

[ray]

hi,tried jungle flasher first and my computer keep freezing and again got error message when loading up i had io32 installed etc but no luck,so i deleted io32 drivers and went with iprep 009 im getting the drive now but its coming up stack overflow error when progressing in bios,any ideas guys or try a different computer?ps i reset bios till default but same error,cheers

[commando_lee]

hi,tried jungle flasher first and my computer keep freezing and again got error message when loading up i had io32 installed etc but no luck,so i deleted io32 drivers and went with iprep 009 im getting the drive now but its coming up stack overflow error when progressing in bios,any ideas guys or try a different computer?ps i reset bios till default but same error,cheers

in your other post you said u had a error message when making your usb bootable! what was that?

explain the process ur doin when u get that message step by step

[ray]

hi,when i open iprep everthing is fine load firmware and when i go to make bootable flashdrive i get the following errors if i hit continue it will make the flashdrive etc,but when i boot into my flashdrive and enter serial code and get the key with the probe i get stack overflow and cant get any further

edit by
cofree

[commando_lee]

cant realy see that screen dump all that good! do u have another usb flash device to eliminate that?

[technoe]

First, I think you should stick with iPrep. Second make sure that your drive is powered on before you boot to your usb flash drive. This will keep dos from having any interrupt errors while you turn on your drive. The reason JF is freezing is becuase the VIA card drivers are installed you must disable them by renaming the file viamraid.sys to viamraid.bak. This file can also be called vsmraid.sys Also when using iPrep make sure that you've ejected the drive, powered down, push tray half-way maybe a little more, then re-power the drive. Now boot to your flash drive. And then just follow the steps on the screen, remember read everything twice and take action once. The most important thing to do is to get a good copy of your drive key. As long as you have that, no matter what you do to the drive you can save your console.

[commando_lee]

any idea what that error could be then "stack overflow error message"

[ray]

guys following steps to the word all is fine now till i get to the serial 1234567 12345 part with probe and drive on ,ejected halfway when i hit key to continue i get same message this session must end stack overflow error,its starting to break me this,any ideas,ps was told to set bios to default but no change,thanks