Trouble updating to 1.6

[ronr179]

Im trying to update to the 1.6 fw using iprep 8.8 i have updated the ixdef to the 1.6
I load the ixtreme 1.6 for the lite-on drive make my flash drive then boot up onto it
But after i type in flit 1234567 12345 enter i get this msg
LitCFW.bin 1234567 12345 for xbox 360 dose not exist-aborting!
Can anyone help me out what am i doing wrong?

[CoFree]

get
RHPG Iprep v009 and update the def file in that.
then use this guide.
viewtopic.php?f=195&t=5130" onclick="window.open(this.href);return false;

[ronr179]

Ok but where can i get that iprep 009 from?

[ronr179]

And do i need to dump the drive before i can flash the drive the drive has already been flashed or do i just start with fLit

[CoFree]

viewtopic.php?f=112&t=48" onclick="window.open(this.href);return false;

do it just like this guide.
viewtopic.php?f=195&t=5130" onclick="window.open(this.href);return false;

[ronr179]

Why dose the the drive need to be dumped again?
If it has already been flashed

[technoe]

Just for good measure you might as well. It's not necessary but is a respectable part of the process.

[ronr179]

well i still tried to just run flit and i still get the same error
I was using iprep 009

[technoe]

Because iPrep uses and autoexec.bat file. And that file will look for specific info first. What you can do is use dosflash, which is already on the usb drive your using. Just type dosflash and you'll get a new screen. Then I believe it asks you to choose your drive/port. Once you do that it should ask if you want to write, read, or erase. Since you already have a good key, choose write, it will then ask you what file you would like to write. type in exactly the name of the file. litcfw.bin (Should be that unless you changed it).

[ronr179]

Thanks got it to work