FLashing samsung compatible with mcp motherboards?

[xXwhygodwhyXx]

Ive flashed my benq with my mcp motherboard and I broked it and now have a samsung drive and trying to spoof my original firmware to it. WHen I load bios and it try to flash it, itgets stuck on erasing...

[commando_lee]

Ive flashed my benq with my mcp motherboard and I broked it and now have a samsung drive and trying to spoof my original firmware to it. WHen I load bios and it try to flash it, itgets stuck on erasing...

Ok, first off all, do you have the oringinal firmware Inc Key ( this is very important)

if you do you will need to make the custom firmware for the samsung drive.

Explain what you have done so far then we will have some idea where your at?

[215XboxMods]

First off let me start by sayin how did you brick a BenQ if you have your Original FW its imposable unless you hook the power up wrong or something along those lines . Secondly with BenQ Samsung you don't need to erase in dos go straight to flashing after you get the original FW and your sure it looks good. LiteOn is the only one you erase first! I would try to go straight to flashing make sure if you need the samsung Original FW you save it. As long as your BenQ Original Fw is good the console is not bricked. Another thing are you using Dosflash command or Fsam ******* ***** ? Did you use JungleFlasher to make FW? What did you use to get the Original FW (Dosflash - Dben - Jungle Flasher)?

[xXwhygodwhyXx]

its not bricked its damaged and yes I have the original copy

[commando_lee]

its not bricked its damaged and yes I have the original copy

ok before you start. do you have an compatable sata port??

If you dont this is the pci sata card that every 1 would recomend this will work with any 360 drive.

http://www.amazon.co.uk/VT6421A-PORT-SA ... 155&sr=8-1" onclick="window.open(this.href);return false;

[xXwhygodwhyXx]

I have a working sata port I used it when I flashed my benq drive and it just wont work with my samsung. IT reads it but when it starts it freezes right when I start to flash the spoofed firmware.

[commando_lee]

I have a working sata port I used it when I flashed my benq drive and it just wont work with my samsung. IT reads it but when it starts it freezes right when I start to flash the spoofed firmware.

follow this tutorial word for word and let us know what stage you get stuck on,

viewtopic.php?f=195&t=5128" onclick="window.open(this.href);return false;

if you need IPREP 9 get it from here

download/file.php?id=614" onclick="window.open(this.href);return false;

also get this file

download/file.php?id=703" onclick="window.open(this.href);return false;

just overwrite the def file with the downloaded file in the resources folder on your hard drive.. normaly located C:\Program Files\iPrep\Resources

[CoFree]

if you are using iprep you will need a via card sata port for the samsung drive
if it a different chipset
then use jungle flasher

[xXwhygodwhyXx]

I have a working sata port I used it when I flashed my benq drive and it just wont work with my samsung. IT reads it but when it starts it freezes right when I start to flash the spoofed firmware.

follow this tutorial word for word and let us know what stage you get stuck on,

viewtopic.php?f=195&t=5128" onclick="window.open(this.href);return false;

if you need IPREP 9 get it from here

download/file.php?id=614" onclick="window.open(this.href);return false;

also get this file

download/file.php?id=703" onclick="window.open(this.href);return false;

just overwrite the def file with the downloaded file in the resources folder on your hard drive.. normaly located C:\Program Files\iPrep\Resources

I can load the hacked frimware but I cant load my spoofed frimware to iprep I even rename it and still wont load.

[commando_lee]

I have a working sata port I used it when I flashed my benq drive and it just wont work with my samsung. IT reads it but when it starts it freezes right when I start to flash the spoofed firmware.

follow this tutorial word for word and let us know what stage you get stuck on,

viewtopic.php?f=195&t=5128" onclick="window.open(this.href);return false;

if you need IPREP 9 get it from here

download/file.php?id=614" onclick="window.open(this.href);return false;

also get this file

download/file.php?id=703" onclick="window.open(this.href);return false;

just overwrite the def file with the downloaded file in the resources folder on your hard drive.. normaly located C:\Program Files\iPrep\Resources

I can load the hacked frimware but I cant load my spoofed frimware to iprep I even rename it and still wont load.

Your spoofed firmware should be called samcfw.bin

with that fw all you need to do is create a bootable usb device to make things easy just so it with the samsung 1.6 firmware. you will not be using this

then open the usb device inside that you will find a folder callled backups OPEN IT

create a folder inside that called 1234567 then open that and create another folder called 12345 then copy and paste your hacked firmware into that. would advise you change the numbers to your serial number.

Then load up your usb device into Iprep then at the c:\ prompt

FSAM 1234567 12345

then select w for write when it asks for name of firmware you will give samcfw.bin

[xXwhygodwhyXx]

I still get no valid firmware loaded this is pissing me off

[commando_lee]

I still get no valid firmware loaded this is pissing me off

do you mean when your trying to load the fw into iprep??

send me your bin files from your lite-on ill create your hacked and spoofed firmware

Pm me