Bricked lite-on

[Riax]

Ok I need help bad this is the first time this has happened to me

Am trying to recover a lite-on that died on me while wiping

Iv read some guides and vids but there all dated

Could anyone point me to one using at least 1.51 fw and with detailed instructions

Thanks!

[sadalius]

Here you go:

viewtopic.php?f=195&t=3226" onclick="window.open(this.href);return false;

[Riax]

Thanks ill give it ago

[louisM92]

Yeah that video is great, it may be a bit old now but there is only one way to recovery a BAD erased lite on regardless what version ixtreme your on. The video should get you up and running in no more than 15mins.

[Riax]

I cant find Iprepv6.2 its not on xbins

Also on the vid he douse not say what version the spoofed FW is he’s using anyone know?

Edit:

I found Iprep6.2

[sadalius]

He's not using a spoofed firmware, or at least not a spoofed firmware as I would think of a spoofed firmware. He's using the hacked firmware that jungleflasher created after reading the key and such. You don't have to use iprep 6.2 either, you can use the latest iprep. You just need a way to get to DOS and for most, using iprep is the way to go. It's the DOS folder of the older version of jungleflasher that you need. You make your iprep boot media, then copy the DOS folder from jungleflasher to it, then put your hacked firmware in that folder as well. Watch the video again man. Make certain you understand whats going on before trying it.

[louisM92]

As sadalius said you dont need to use iprep 6.2, you can use any iprep, i had to use a newer version of iprep when i was in your situation, i tried 3 different computers with 6.2 but it would not boot into dos, at the time i was a nervous wreck because the drive that locked up wasnt mine lol in the end i think it was 8.0 i used to make the boot device.

You should write down each command CoFree types in his video so you dont forget, easy when you have it all written down.

[Riax]

^^ ye anit mine eather its a friends

Ok iv managed to get iprep 9 booting on ONE computer

Only problem is i dont know the port any clue where to get it?

[sadalius]

You would use the same port that you were using in Jungleflasher.

[Riax]

Ye only problem is that its on a pc without a hdd since it would not boot on the others (Yes i changed the bios)

[sadalius]

Wow... You might have problems doing that on a computer that doesn't have a hard drive. You've no way of knowing if the sata driver has been installed or not. It might benefit you to slap a small HDD in there and setup windows XP or something on it so you can get the port number and such.

[Riax]

Just did that had to straighten a few pins but got it up and running got the port ID from iprep its AC00

Now I booted the disc typed ‘l-o-eras.exe ac00’

I end up getting a message saying bad command or file name

I used RHPG's iprep v009 if that matters

[louisM92]

Make sure you have the correct files on the usb stick.

[Riax]

On the stick there is the following

BACKUPS
CFW
Autoexec.bat
dlit.bat
DosFlash.exe
DosFlash.typ
DummyGen.exe
FirmTool.exe
fLit.bat
Lite_CFW.bin

BOOTLOG.PRV (Hidden)
BOOTLOG.TEXT (Hidden)

[sadalius]

You need to download the older version of jungleflasher. Probably the original version. Once you extract it, there will be a folder in there called DOS. Put your hacked firmware in that folder and then copy the entire DOS folder to your USB stick. Now boot to the USB stick. Once you get to the DOS prompt, type in "CD DOS" without the quotes and then hit enter. Now is when you type in the l-o-eras AC00 twice and then follow the rest of the video guide.