Is there any chance that i can spoof hitachi 47 drive with a samsung key using jungle flasher.
If so could you please explain how,
Thanks.
can i spoof hitachi 47 with samsung key using jungleflasher
- HaGGardSmurf
- Ally of Robinhood
- Posts: 4088
- Joined: Tue Feb 03, 2009 9:46 am
- Location: Alberta, Canada
Re: can i spoof hitachi 47 with samsung key using jungleflasher
So you want the hitachi 47 to appear to be a samsung?
IE: Your replacing the samsung with the hitachi 47?
This is how you do it:
IE: Your replacing the samsung with the hitachi 47?
This is how you do it:
When you hook up the samsung drive and dump it check and see if it is a MS25 or MS28, it will say in the main tab of jungle flasher. You will need to know what the drive type is when you spoof later. (Step 15)HaGGardSmurf wrote: Well, spoofing a hitachi is not as simple as all the other drives.
1) Get your Samsung hooked up to your computer
2) Dump the firmware, and check for a valid key
3) Hook up your 47, and dump it (You will need the OFW later if you update the firmware)
4) Load your Samsung's firmware as source
5) Highlight the key, and copy it
6) Load ixtreme for the 47 as target (or your 47's OFW)
7) Click "Spoof Source To Target" (Kind of pointless to do, but its just to be safe)
8) make sure your drive is shown, and the 46/47 button is selected
9) Send mode b (In JF)
10) Select Flash Key Sector, and click "Flash Keys"
11) When the box pops up asking you what key, paste in the key you copied from the Samsung
Now if your flashing ixtreme:
12) (Make sure you have done steps 4-7) Select flash ixtreme, and click flash hacked F/W (You will be flashing ixtreme 1.51 for the 47)
13) Now select flash spoof data
14) Click Flash ID's
15) When the box pops up, select Toshiba Samsung ts-h943 (Ms28, or 25, depending on your drive)
16) Click OK
17) Go test the drive in your xbox
If your flashing just the stock FW:
Continue with steps 13-17 (no step 12)