Robin Hoods Playground

I finally had everything in place, i got back from the hardware store with a set of torx screw bits. and the discovered another warrenty seal on the disc drive! is this normal? i have a DG-16d2s liteon; manufactured november 2008.anyone managed to preserve this sticker? HELP!

Yeah they have a small paper sticker on them. If you heat it up with a hairdryer it should come straight off with a sharp blade but take your time and go easy.

I thought as much, im just a bit wary of blasting hot air all over the drive. i dont want to melt anything.

You wont melt anything, the drives case is metal and quite large, I would be amazed if you could even heat the drive up enough with a hair dryer that anything inside is warm.

To take off this sticker, its pretty easy, just 10 seconds of heat with a hairdryer should do.

Keep in mind when your drive is in your xbox is gets quite hot there is a heat sink under it.

it's funny how concerned i was with the preservation of the stickers, to the detrement of my liteon drive methinks. thanks again for all the help.

samretroman wrote:it's funny how concerned i was with the preservation of the stickers, to the detrement of my liteon drive methinks. thanks again for all the help.

Well isnt it all fixed now? So good thing you did preserve the stickers, if anything does go wrong you still have your stickers