help

[andipad]

i tryed to flash my lighton drive and i got something on my screen E64 is there any way to fix it

[commando_lee]

i tryed to flash my lighton drive and i got something on my screen E64 is there any way to fix it

check that you have the cables in the right way around. also if that dont sort it re-flash your drive make sure you use the 1.6repack fw for the lite-on

[andipad]

i cant reflash the lighton drive does not eject i flashed but i guess i did not do it right when i turn on xbox there is a red light and on my tv screen its black and it says E64

[commando_lee]

i cant reflash the lighton drive does not eject i flashed but i guess i did not do it right when i turn on xbox there is a red light and on my tv screen its black and it says E64

Sounds like your drive has locked up.

follow this

open jungle flasher and.

1. select load source firmware (your dummy.bin from JF dump)
2. yes to load ixtreme or manually select the liteon ix1.6.bin file.
3. click spoof source to target. (details will be copied across)
4. click save to file
5. You MUST save as litcfw.bin

Now save this to iprep usb drive folder Backups\1234567\12345
you may need to make the folder 1234567 and then inside that folder create the folder 12345 save the litcfw.bin in there.

Opening the tray: follow pic below then.....
Once you can open the tray pull the tray out fully and push half way back in. Now, hook it up to the PC using
Connectivity Kit and Sata, power on and flash your new firmware.

Flashing your liteon in iprep.
Start iprep and do the following:

1. flit 1234567 12345
2. follow instructions (power cycle drive etc)
3. select W to write firmware
4. type when asked litcfw.bin
Thats it youre flashed.




Trouble shooting!
If you get unknown vendor issue or unkown flash chip:

Unplug all cables from dvd drive count to 4 seconds then replug everything back up.
still no joy:
Reboot pc this time leave drive powered on if pc freezes then you will have to restart with drive off.

Also try erasing your drive with L-O-Eras.exe.
copy the l-o-eras.exe to the root of your iprep usb stick.
start iprep and at the prompt type l-o-eras.exe EC00 (replace EC00 with your sata port)
You may need to do this several times until you get the correct drive response. (0x72)

[louisM92]

Doesnt look like hes using a connectivity kit commando, maybe he should take a look at the lite on locking up video, here it is http://www.robinhoodsplayground.com/for ... 195&t=3226" onclick="window.open(this.href);return false;

[andipad]

no yes i do have connectivity kit but i guess i messed up doing the flash but thankyou u 2 i contact xbox to send it in for repair dont know if they will accpet it cause i took of the warranty sticker

[louisM92]

Ohh i thought you were using the xbox to power the drive, sorry commando well i dought microsoft will take it in to fix because they will more than likely know you have tampered with the drive, if you follow the video in the link i shown you in my last post you will be up and running in no time

[andipad]

i looked at it but i my light on drive is bricked the disk tray does not open at all with the ck3 i called microsoft and they told me that there were going to send me a ups label so i can send it to them i told them that my console did not have a warranty sticker on it and they said not to worry about it and that there sending me the label to send it to them so i dont kno if they will fix it but i found a website were i can send it without it have the warranty sticker and for like 59 dollors they can fix it for me the website is 360 pros i found that website on google sorry about spelling

[commando_lee]

no probs louis, you can just follow that tutorial i gave you and that will put the firmware back onto your drive.

thats the reason for it not ejectin

[andipad]

yes but the problem is i dont have the dummy.bin from JFDUMP

[andipad]

thankyou so much commando lee i did what u told me and it worked i am so happy i dont have to send it to microsoft

[commando_lee]

Your welcome mate, glad to be of some help

[andipad]

does anybody kno if it is safe update thier console with the new update from microsoft

[commando_lee]

viewtopic.php?f=61&t=7155&p=40907#p40907" onclick="window.open(this.href);return false;