Maybe its my USB stick??? Please Help Urgent!!!

[CBULLY]

I've been trying to flash my refurb benq 360 after getting 2 rrod this very same week on both my other consoles ...I was attempting to use IPREP 10/ 1.6 ixtreme/via card (thats i used to flash to other 360s) and the very same usb (cruzer 4gb)...Everything appears to load accordingly onto the usb but when i attempt to boot into windows using the usb I get this message on the screen...

VERIFYING DMI POOL DATA....

REMOVE DISKS OR OTHER MEDIA
PRESS ANY KEY TO RESTART

(I have everything ungpluged (hdd,dvdrom, no floppy, just the usb) so I hit enter as stated)

then it says...
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PERSS ENTER...

I'M STARTING TO REALLY STRESS BEING THAT I'VE BEEN HAVING A BAD MICROSOFT WEEK AND AM NOW SEARCHING TO SEE IF THIS CAN BE FLASHED BY CD/DVDROM...
PLEASE HELP WITH THIS SITUATION AS I HAVE SEARCHED EVERYWHERE FOR QUITE SOME TIME NOW AND CAME UP WITH NOTHING!!

[GRASSASS]

try a smaller usb stick maybe ?

[rkd2398]

You have to make sure that your bios will allow you to boot from a usb device.(That's why it says enter system disc and reboot.)

[CoFree]

go back to v9 iprep
we are working a bug or two out of v10

use a flash 2gb or smaller

[CBULLY]

You have to make sure that your bios will allow you to boot from a usb device.(That's why it says enter system disc and reboot.)

I have the bios set as 1st removeable, 2nd hdd, 3rd cdrom....there' is no floppy drive on my pc...btw i've modded several 360s on this same pc and even my other pc running xp os says the same thing when usb is loaded...

also, i just purchased a new usb 2gb stick ...i will update in a few

[CBULLY]

go back to v9 iprep
we are working a bug or two out of v10

use a flash 2gb or smaller

was thinking that too due to a post i found about the ben file needing to be switched...searching for v9 now...and thanks for the responses guys i really appreciate it!!

[CBULLY]

okay so i found iprep v9 but when trying to load the firmware it says...

no valid firmware loaded

also i ran opened the program as admin...???

[HaGGardSmurf]

For the no valid FW message use this:
viewtopic.php?f=131&t=5574" onclick="window.open(this.href);return false;