problem with a samsung
problem with a samsung
hey guys, i was flashing a samsung when jungleflasher crashed whilst it was writing bank 1 and now jungleflasher wont even pick up the drive, ive tried making a bootable usb drive with iprep 10.7 but every time i try to load my original firmware its telling me its not valid? im running vista 32bitif thant needs to be noted?
Re: problem with a samsung
you will have to do a restore
you cant load your firmware that way.
do this but with sam not ben.
do this
make a iprep boot flash with RHPG Iprep v009
in the backup folder make a folder named 1234567
then in that folder make a folder named 12345
in there put the firmware you want to flash in(a copy of your orig firmware
).It needs to renamed to ' bencfw.bin "
with out the " " of course
this would be a copy of your orig firmware that you rename.
then just flash it in like normal
boot on the flash and run the flash command
fben 1234567 12345
that will flash in a copy of your orig firmware.
you cant load your firmware that way.
do this but with sam not ben.
do this
make a iprep boot flash with RHPG Iprep v009
in the backup folder make a folder named 1234567
then in that folder make a folder named 12345
in there put the firmware you want to flash in(a copy of your orig firmware
).It needs to renamed to ' bencfw.bin "with out the " " of course
this would be a copy of your orig firmware that you rename.
then just flash it in like normal
boot on the flash and run the flash command
fben 1234567 12345
that will flash in a copy of your orig firmware.
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
No Questions by PM.
No Questions by PM.
Re: problem with a samsung
i forgot to mention the drive is permanently stuck in vendor mode and my pc really doesnt like it being on (can freeze for up to 20 seconds whilst just trying to navigate junglecrasher or iprep) is this normal, also ive never flashed off a usb drive before, also are the 1234567 / 12345 my serial number because i had a look at that guide and i really dont know how to flash a drive off a usb stick, can i do it in jungle flasher?
Re: problem with a samsung
ive never tried to do a recover in jungle flash
when jungle flash was locking people drive up
iprep was all that would get it going
you dont hook up the drive till your pc is in dos
you just build your flash with prep
the 1234567 is in place of your ser number
you can use your ser number
you would just have to name the folders in the backup folder then first 7 of your ser the the 2nd folder the last 5 nubmber
dont lose your copy of your "ofw' and/or "cfw"
end the end if you dont fill good about doing this you n=may want to drop saalius a pm
and see if he will do it for you.that is if you are in the usa
when jungle flash was locking people drive up
iprep was all that would get it going
you dont hook up the drive till your pc is in dos
you just build your flash with prep
the 1234567 is in place of your ser number
you can use your ser number
you would just have to name the folders in the backup folder then first 7 of your ser the the 2nd folder the last 5 nubmber
dont lose your copy of your "ofw' and/or "cfw"
end the end if you dont fill good about doing this you n=may want to drop saalius a pm
and see if he will do it for you.that is if you are in the usa
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
No Questions by PM.
No Questions by PM.
Re: problem with a samsung
nah im in the uk mate, never flashed a drive using dos, what programs would i need for this and which tutorial would you reccommend?