haveing troubles any thoughts

[caveman]

ok so it looks like im haveing troubles with jungle flasher 1.66b and flashing it.. i have 2 compys that reconized and install the drivers for my sata card witch is the raid chipset(VIA VT6421A) if thats any problems to begin with and well i hook it up on the windows xp and got the jf and installed the port i/o i believe and seems to work fine so far then i got to turning on the xbox (note no connectivity kit outta the case) and it reconises the dvd drive witch also is benq (vad6038) and well ive gotten the firmeware (BenQ_iXtreme-THX_v1.6)and extrated the folder were it should be and go to sending the keys to the drive and many errors pop up saying timed out or no responce error xdoo something and if i keep turning on and off and try try again i will somehow get to the data or w/e before u click read ...anyways when i got to click read it seems to not load properly and will get to 1 dot on drive 0: and kindof frezzes loads frezzes loads ect and i waited to see what happend and well it took many hours to get 5 dots filled o.0 any thoughts far as this goes also sry if im reapeting anyones else question and ty in advance for all the help much props for all the hard work yall do into this site its very gangsta stealing from the rich MS and giveing to the poor broke white people like myself chiasome
also vista compy does same thing but way way worse havent tryed iprep cause of the rebooting and going into flash mode i dont really know how XD and my homie did all what i jus explaind on his hitachi w.e and works jus fine any ways sry for long post ty for any help that is givein yall the best

[HaGGardSmurf]

For future posts, try to use paragraphs or something, its much easier to read.

Anyways, are your via drivers enabled? If they are, thats usually what happens with JF when you try to flash drives with them enabled, sporadic freezing, errors, and failures.

[caveman]

lets try this again this vid quality sucks cause damn psp cam xP so hopefully it can help in some ways http://www.youtube.com/watch?v=gPoRrUxnZes" onclick="window.open(this.href);return false; as u can see i get the many errors and if i keep trying i can click read but the reading bank 0 gets that one dot and doesnt want to fill up fast as takes forever o.0 so yea tell me what u think and as far as via drivers enabled how would i got to disableing if its not to hard to ask any other help is much appericated ty so far

[HaGGardSmurf]

viewtopic.php?f=63&t=4351&st=0&sk=t&sd=a" onclick="window.open(this.href);return false;

Its gotta be your via drivers...

[caveman]

ehhh its not wanting to work on my windows xp and i have a homie use team viewer on it to see whats going on he didnt know what to do xD but imma mess around and see what it does on the vista and see if it will work on there ty for helping me so far

[intheshade]

Sometimes I dont give the best advice. But I think you should not attempt to flash your ben q with your pc. Some people make flashing look easy. However there is dire consequences from a bad flash. You may be mad with the end result.

[djshauny1]

check your pm box in 1 min mate
ill help u through it

[djshauny1]

Ok just sent u the pm
have a look

[caveman]

welp i tryed alot of things and well i got as far as were its working lil better and well i tryed the vid drivers where its yellow taged well when i go to use jungleflasher 1.55 -1.67 and the i/o wont find the raid controller :\ but it works good now it wont frezze up or give alot of errors it will read the the info on a samsune ms28 jus fine but still when i go to hit read the bank 1 jus gets one dot and wont read anymore sry to bring up old ass topic but if any other help can be done let me know i can post some vids if u want ty in advance