activate.gutt'd

The place to ask your questions about the Xbox 360
Post Reply
User avatar
GRASSASS
Board Warrior
Board Warrior
Posts: 390
Joined: Mon Jan 28, 2008 9:55 pm

activate.gutt'd

Post by GRASSASS »

dam i just dont know wot to do i have got activate.iso from 3 diff sources but for the 8th verb/coaster im at my wits end :evil: :roll: :evil: dam.
i know wot your gona say -imgburn/l0 (first layer only burn)/2.4x & book type to DVD-ROM ITS ALL BEEN DONE ?!? iv also tried clonecd/dvdinfopro but no joy
each and ever burn has finished fine with imgburn but when i put them into xb i get that "play DVD" then a little white squigly pattern screen saying "put into a xbox360" in all languages
im realy realy stumped and verbs aint cheep - and it gutting to have to use 1 for something so small too :(
is there another burner im not aware of that can handle this little project ?
i have read all the other posts on this subject both here and elsewhere i have 2 lite-on dvd-rom+dl burners and they are fairly new ???
a flashing frenzy huh huh
stutterman
Bandit
Bandit
Posts: 153
Joined: Sun Oct 19, 2008 12:39 pm

Re: activate.gutt'd

Post by stutterman »

hi
These instructions were made using Imgburn!!!

Activate.iso is designed to enable One-shot boot mode for the iXtreme 1.6 firmware. One-shot boot mode allows you to boot your unstealthed, modified or “Hybrid” backups without any strict stealth checks!!!!

PLEASE NOTE!!! DOES NOT BOOT UNSTEALTHED XBOX 1 BACKUPS!!!! I was really hoping it would….


1: You need your Activate.iso file! should have come with any version of iXtreme 1.6. download one of those to get Activate.iso.

2: Once you have the activate.iso file, you wanna drag and drop or save it to your desktop.

3: Insert a DVD+R DL into your dvd burner.

4: Now open up Activate.iso with any burning software you use. (I.E. Imgburn, Clonecd, etc… I personally use Imgburn… )

5: Now in your burning program go into your write setting tab and make sure your layerbreak is set to the Calculate Optimal setting. Also check your booktype for DVD+R DL and make sure its on the DVD-ROM setting and that your write speed is at 2.4x.

6: Start Burn!

7: As soon as the burn starts a message will pop saying, “that the image is small enough for a regular DVD R, do you want to continue anyway?”
(You wanna choose yes because burned to a regular DVDR the Activate.iso wont work!!!)

8: Next another message will pop saying, “even though the image is small enough to fit into one layer its best to write in both layers, do wou wanna go away from the norm and write in only one layer?” (Now I wanna stress…READ THIS MESSAGE CAREFULLY!!!!)

Choosing “Yes” will cause all data to be wrttin into the first layer.

Choosing “yes” will cause data to be writing into first layers.

CHOOSE YES

9: It will burn then finish…

10: Insert the Activate.iso disk into your xbox 360. It will read for a little longer than usual then finally it will say “Play DVD”. Press “A” on your controller and a video should pop saying, “Play this disk in an xbox 360 console“.
This is how you know you’ve burned the iso sucessfully!!

11: Now just eject the Activate.iso disk and insert your unstealthed, modified or Hybrid disk and it will load
I hope this helps
Last edited by stutterman on Fri Oct 16, 2009 8:02 pm, edited 1 time in total.
User avatar
GRASSASS
Board Warrior
Board Warrior
Posts: 390
Joined: Mon Jan 28, 2008 9:55 pm

Re: activate.gutt'd

Post by GRASSASS »

cheers stutterman
thats wot im doing :roll: oh well
a flashing frenzy huh huh
spartacus99
Squire
Squire
Posts: 22
Joined: Sun Sep 20, 2009 5:47 pm

Re: activate.gutt'd

Post by spartacus99 »

It must be burned to first layer only this is a link and direct quote from abgx rep to them

The disk is available here: http://www.sendspace.com/file/5ed5xr" onclick="window.open(this.href);return false; and needs to be burned to a DUAL LAYER disk, but entirely on the first layer (do not set a layerbreak and when imgburn prompts, tell it to burn to the first layer only).

Hope this helps, there is a readme included in the file
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: activate.gutt'd

Post by CoFree »

have a look at the vidoe man
it works fine
as soon as it comes up play dvd
eject it and put in the game.

http://www.robinhoodsplayground.com/for ... 196&t=8418" onclick="window.open(this.href);return false;
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
stutterman
Bandit
Bandit
Posts: 153
Joined: Sun Oct 19, 2008 12:39 pm

Re: activate.gutt'd

Post by stutterman »

sorry for the misteak on my post just re edited it (SORRY)
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: activate.gutt'd

Post by CoFree »

also guys
you can get the activation iso from here.
http://www.robinhoodsplayground.com/for ... f=112&t=48" onclick="window.open(this.href);return false;
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
User avatar
GRASSASS
Board Warrior
Board Warrior
Posts: 390
Joined: Mon Jan 28, 2008 9:55 pm

Re: activate.gutt'd

Post by GRASSASS »

wot an idiot i am i burnt 10 off and they all m/f worked but i was trying to play the disc not bloody eject it when it says play dvd....omg im so gutted i threw them all away yesterday :roll:
thanks cofree once again youv saved the day :D
a flashing frenzy huh huh
Post Reply

Return to “Beginners”